Specification Sheet

92016-800-480_A WAM
PP-800-480
Powerpak™ Steam Generator Package
Rough-In Guide
PRODUCT PHOTO
SPECIFICATIONS
Input Voltage……………............………480VAC, 3-Phase
Kilowatt Rating…………………….……….….…….....24KW
Maximum Amperage….…29 AMPS @ 208VAC (3-Phase)
Water Inlet……………………..…..……..3/8” Compression
Steam Outlet………………………………….………1.0” NPT
Safety Valve……………………………………..……3/4” NPT
Maximum Room Size (cubic Feet)………………………800
 1 Year parts and labor in-field warranty, 5 years at factory
 On Demand Steam with included Mechanical Timer
 1”NPT steam line
 Can be plumbed 50 ft. from the shower without upsizing
the generator.
 Stainless steel construction throughout.
 Temp Sensor with 50ft Lead wires is included
Installation Notes: Must be installed by licensed electrician. Install this generator according to the supplied installation guide. Follow local
plumbing and electrical codes. Unit must be accessible. Generator is factory sized: L x W x H = Cubic Feet. Choose the appropriate generator.
For every additional foot of ceiling height over 8 ft, use the next larger generator. Always round up when calculating the total cubic feet.
Product Specification Basics:
The steam generator unit dimensions shall approximately
be 16-1/4”L x 18-1/4”Wx 32”H in dimension. The generator is made
from stainless steel and includes: PowerFlush & Split Tank. Also
included is a Master Controller mounted on generator unit.
Shipping Information:
Weight………………113 lbs.
Length…………….…23 in.
Width…………..…...23 in.
Height……………....36 in.
For any further assistance please contact ThermaSol at
800.776.0711 or [e-mail]
Visit www.thermasol.com for a complete product definition
POWERPAK™ Series Standard Equipment:
 All system components come packaged together for convenient
ordering and the elimination of errors
 Pre-installed ¾”NPT pop-safety valve.
 Fully programmable digital control system: Convenient and easy to use
 7 day programmability: Specific to both time and temperature and
optimized for day-to-day individual settings
 PowerFlush™ inner-tank cleaning system: Automated pressurized
decalcification system helps eliminate sediment build-up
 Stainless steel split-tank design adds longevity by separating the
heating function from the water feed function
 Constant steam at a constant rate: no irritating steam lags or bursts
 Superior Heating Elements: A level of corrosion resistance far superior
to copper, brass or stainless steel
Product Information:
Length…………..…16-1/4in.
Width…………..….18-1/4 in.
Height……………..32in.