Installation Sheet

Complete Installation9
Install the Screw Covers with O-Rings by hand.
Allow the silicone to dry for 24 hours before use.
Move Into Place8
Guide the HydroVive into the ceiling and rest it on the highest
hook you can reach. Use the 3.5" included mounting screws, and
gradually insert them a little at a time to evenly lift the HydroVive into
position to create a seal with the previously applied silicone. DO
NOT OVERTIGHTEN! Once the HydroVive is in position and the
silicone seal is created, no further clamping force is necessary.
Sealing HydroVive7
Apply silicone along the groove on the back of HydroVive.
Total Wellness Package
THERMASOL.COM
I
800.776.0711
17