product image) Owner's manual

- 23 -
5 SETUP MODE
5.1 Enter Setup mode
In the Setup mode the transmitter can be configured to the individual requirements.
MEAS
°C
READY
ATC
pH
“User-Setting” Mode
(User can only
view parameters)
ENT ENT
ENT
“User-setting” Mode
(User can change
parameter settings)
1. While in measurement mode, press the ENT key.
2. The display prompts to enter the security code. Set the security code with or
key to:
“SCD 22” to change parameter settings
“SCD 0” to view parameter settings only (view only mode)
3. Press the ENT key.
NOTE:
To exit from any intermediate steps, press and keys (Escape)
together. It will return to measurement mode.