User's Manual

Diagnostics
Tests
Thermo Electron Corporation AutoRADIO User Guide 4-3
7. The station is now displayed in the right pane. Repeat this process for
each repeater or slave you want to add to this network.
Figure 4–4. Example network with one slave station
8. You can save this network setup by clicking File, Save from the main
window.
9. Repeat these steps to build additional networks as necessary.
View the configuration parameters of individual stations by right clicking
on the station and selecting Station Property.
Right-click a station in the right pane to access the tests you can perform.
This option allows point-to-point link between two radios by dialing other
radio ID. This link is most robust because transmit and received data are
acknowledged.
Note that when in this operating mode, radios will ignore messages from
other radios in the network, including master and repeater radios.
This test enables you to observe the transmit and receive performance of
the selected unit. The unit sends data to the targeted radio, and the
targeted radio returns the received data to the unit. Enter the size of the
packet to be sent and the total number of packets to send. Click Start.
Station Properties
Tests
Dial
Loop Back Test