Information

thermo Flächenheizungs GmbH
Robert-Bosch-Straße 7
85296 Rohrbach
Germany
[e-mail]
www.thermo.de
SILICONE HEATING ELEMENT
Construction
A Silicone heating element consists of an etched or wire wound resistive element laminated between two lay-
ers of silicone rubber. By vulcanising both layers we achieve a high mechanical stability of the exible and light
weight Silicone heating element.
The heater therefore is water and chemical resistant, which qualies especially for rough environmental
conditions.
Silicone heating element
voltage range
up to 1000V AC/DC
1- or 3-phase
max. watt density (controlled) 9,0W/cm²
watt tolerance ±10%
min. dielectric strength 12kV
max. size 1200x3000mm
min. size 20x50mm
min. thickness 1,0mm
max. continuous operating temp. 230°C
min. ambient temperature -50°C
connection options
cables, thermostats, thermal fuses,
sensors, safety temperature limiters
sealing (connection point) silicone
RoHS compliant yes
protection class IP X7
Features
• high temperature range
• homogeneous temperature distribution
• high mechanical stability
• customer-specic design & conguration
• water and chemical resistance
• high watt density
Applications
• (rough) outdoor implementations
• high temperature applications
• mechanical engineering
• food service & catering equipment
The information contained in this data sheet is to the best our knowledge, true and accurate.
Nothing contained herein is to be taken as a recommendation for use in violation with any pa-
tents or applicable laws or regulations. thermo Flächenheizungs GmbH makes no warranties
as to the tness or use of any products based on the data contained herein, and disclaims all
liability for resulting damages.
Technical specications
Revision 11.2016 - Copyright
®
thermo Flächenheizungs GmbH