Use and Care Manual

International Thermocast Corporation
______________________________________________________________________________________
308 Bell Park Drive Phone [phone]
Woodstock, GA 30188, USA Facsimile 678-445-2039
www.thermocastsinks.com
Care and Cleaning Instructions
Thermocast sinks are designed and engineered to resist scratches and
stains when used properly. The impact resistant durable finish will resist
food acids and should not stain under normal kitchen use. Improper use
can and may damage this sink or its finish and void the warranty.
PLEASE REVIEW THE FOLLOWING INSTRUCTIONS CAREFULLY.
HOW TO CLEAN YOUR SINK
● Rinse the sink thoroughly after every use. Sanitize your sink with bleach
once a month to maintain a clean, fresh surface.
● Use of a soft cloth or sponge and liquid soap will remove any residue.
● Sink scratches can be buffed and polished with a liquid based auto
polish to maintain a high gloss luster.
● Use of abrasive cleaners is not recommended and could dull the finish.
● The use of abrasive cleaners could void the warranty.
USING YOUR THERMOCAST SINK
● Protective mats, racks or dishpans should be used to protect the sink
bowls and Thermocast recommends use of these products.
● Always use a cutting board or sink protector when using knives or sharp
objects in the sink. Knife cuts will void your warranty.
● Do not pour hot grease or place hot pans directly into your sink as it
could damage the surface and void your warranty.
● Remember, if you do damage your sink, minor cuts or scratches usually
can be buffed and polished out of the finish. Use a liquid based auto
polish to maintain the appearance and luster of your sink.