Instruction Manual

4
4
FLO-DRI lter installation instructions
4
FLO-DRI lter installation instructions / Cartridge Media
C. FLO-DRI FILTER INSTALLATION INSTRUCTIONS
1. For maximum efciency, FLO-DRI unit should be
installed as indicated in Figure 1.
2. Install in a vertical position only.
3. Tighten ttings into casting 5.5 to 6.0 turns. Do not
over-tighten threaded connections. This may lead to
thread damage or possible cracking of the casting.
4. Ensure ow direction is as indicated on the unit.
5. Installation of drain leg is highly recommended.
F
L
O
W
SHUT-OFF VALVE
OUTLET
INLET
UNION
SHUT-OFF VALVE
UNION
OVERALL DIAMETER
PORT TO PORT
2"
50.8mm
3"
76.2mm
0.375"
9.5mm
0.5"
12.7mm
4.5"
114.5mm
Figure 1 – G-10 & M-10 Assembly Diagram
Table1 – Scrubbing system
Scrubbing
System
Model No. PSIG
No. of
Cartridges
Overall
Length
Overall
Diameter
Port to
Port
Pipe
Size
NPT
Bed
Cubic
in
3
Cartridge Media
Part No.
in m in mm in mm
Natural Gas FLODRI-G10A
150 1 8.50 216 4.00 102 5.00 127 1/4 12.56
FLODRI-10AA
FLODRI-10AC
FLODRI-10MS
Compressed
Air
FLODRI-M10A FLODRI-10R
D. CARTRIDGE MEDIA
D.1 Natural Gas
AA - Moisture Removal
AC - Odor Removal
MS - H
2
S & Moisture Removal
D.2 Compresssed Air Cartridge Media
R - Moisture, Oil and Heavy Liquids Removal, Air
Purier