Thermometer' LED DIGITAL INSTANT READ THERMONUCLEAR THERMOMETER INSTRUCTION MANUAL Modal No.
PRODUCT Automatic Rise Button LED Display Magnets Battery compartment Thermonuclear Probe Te op 1. Automatic Release Button: Press to automatically release the probe. 2. LED Display: Displays the current temperature. 3. Stopper Lock: Holds the temperature probe In place when fully extended. Always fully extend the probe so it locks securely in place. 4.0 Button: Press once to tum ON the unit, hold for 3 seconds. 10 tum OFF. It will automatically tum off if no button has been pressed In 80 seconds. 5.
2. Press O once to tum ON the unit. 3. Press and hold LOCK/F/°C for 3 seconds to switch between °C and °F. Please note that the temperature unit selected will remain when you turn on the thermometer next time. 4. Insert the tip of probe Into food bang cooked as below picture shows. The thermometer will start to measure the internal food temperature. 5. Wait until temperature reading stabilizes on the display. 6. Press ¢ button to tum off the thermometer.
UNDO-CALIBRATION If you want to nude the calibration and go back to the default calibration setting, please follow the below steps: 1. Tum on the thermometer and press the ® button 5 times ina row to enter Calibration mode; 2. When you see temperature reading begins flashing, press and hold the for 3 seconds. The temperature reading will stop flashing and the calibration is set to the default setting.
TherméPra' THERMOMÈTRE THERMOCOUPLE A LECTURE NUMÉRIQUE INSTANTANÉE ET ÉCRAN LED MANUEL D'UTILISATION Modal n®: TP-18 PRODUIT Bouton d'extension automatique Écran LED Allants Compartiment & plies Bouton d’extension automatique : Appuyez sur le bouton d’extension automatique pour allonger automatiquement la sonde. 2. Écran LED : Affiche la température actuelle. 3. Verrou butor : Garde la sonde de température an place lorsqu’elle est enterrement allongée.
8. Sonde thermocouple super rapide : Capteur de grande précision afin d'obtenir les mesures de température en 3 secondes. spécifications 1. Amplitude de température : -10°C ~ 300°C {14°F ~ 572°F). 8I la température est située au-dessous de -10°C (14°F) ou au-dessus de 300°C (572°F) °F, LLL ou HHH sera affiché a Géraniée. 2. Deux boutons : & et 3. Fonction d'extinction automatique après 90 secondes 4. Résolution : 0,1 °C/°F 5. Précision de la température : +0,5°C entre -10 et 300°C (14 ot 572°F) 6.
la suite pour entrer en mode de calibrage. CAL commencera a clignoter pendant quelques secondes, pulls la température actuelle commencera & clignoter, ce qul veut dire que le thermomètre est an doms de calibrage ; 8. Immergez la sonde dans le mélange eau/glace st assurez‘vous de ne pas toucher les cités du conteneur. Attendez que Ia lecture de la température descends au plus bas, ce qui devrait être aux alentours de 0°C. Sl la température du 1. Attendez que la mesure de température se stabilise sur I'écran.
* ll est recommandé de nettoyer Extrémité de la sonde entre les mesures. Cali est particulièrement important lorsque vous effectuez des mesures entre différentes sortes d'aliments et de viandes. * Le thermomètre est congru pour une utilisation manuelle et temporale. No Ia laissez PAS dans un four. Ne |e laissez PAS Inséré dans des aliments ou des liquides extrêmement chauds {dépassant 300°C) pendant plus d'une minute. = Effectuez toujours vos mesures dans les parties les plus palissades de |a viande.