* Take spent hatters to the appropriate collection point or to a dealer. « Your town or local authority can provide information about public collection points. This symbol can be found on noninterchangeable batteries which contain hazardous: * Postconsonantal lead . Cr talons cadmium «Hg = contains mercury * Ll=contains lithium 20. Limited One-year Warranty Thermometer warrants this product to be free of defects In parts, materials and workmanship for a period of one year, from date of purchase.
1. Introduction Congratulations on your purchase of the Professional Remote Food Thermometer, a programmable radio frequency food thermometer. You will now be able to remotely monitor the temperature of cooking food and the temperature Inside your grill, oven or smoker from anywhere In your home. 2. Components 1x Receiver 1x Transmitter 4x Detachable, color coated stainless steel probes with steel mesh cable 4X AAA batteries clips 3.
4.
5. Touch the Thermometer (back light button) on the top of the transmitter to turn on/off the back light. 6. Press the ALARM button on transmitter you will turn on/off all probes’ alarm. Press the PROBE button to select the probe then press and hold PROBE button for 3 seconds to turn on/off the corresponding probes alarm. 9. How to Set Meat Temperature to Your Specific Taste 1.
stays below 40 °C for 2 hours. The unit will save the current settings after the unit is turned off. 13. Synchronize/Pair Transmitter and Receiver The transmitter and receiver were already paired at our manufacturing facility. Usually you do NOT need to re-synchronize or re-pair the units. You Just plug in the probes, insert batteries, turn on the receiver and the transmitter and Walt for a few seconds, you will see the temperatures shown on both receiver and transmitter and the units are ready for use.
16. Cleaning « Always wear heat resistant glove to touch the stainless steel probe sensor or wire during or Just after cooking. Do not touch with bare hands. Keep the stainless steel probe sensor and wire away from children. Wash the metal probe tip with hot soapy water and dry thoroughly. Do not Immerse the probe In water while cleaning. Wipe the transmitter and receiver with damp cloth. Do not immerse either in water. 17.