User's Manual

The maximum transmission range is 50 meters from the remote sensor to the monitor (in open space).
However, this depends on the surrounding environment and interference levels. The temperature
signal travels in a straight line from the remote sensor to the monitor. The signal will not curve around
an object. If no reception is possible, despite the observation of these factors, all units will have to be
reset.
3.0 Clock and calendar setup
1. Press and hold the “SET” button to activate the clock and calendar setup mode.
2. Press the “+” or “–“button to set the requied hour time.
3. Press the “SET” button to confirm and turn to next setting.
4. Follow steps 2-3 to set the hour, minute, year, month and date in sequence.
NOTE: Keep + or – buttom, it can be quick setting.
No any action more than 20 seconds, it will quit to normal mode.
4.0 Recorded daily highest and lowest temperature
1. Press “MAN/MIN” button to check the daily highest and lowest temperature.
2. To clear the daily memory, press and keep the “MAN/MIN” button when the highest and lowest
temperature is displayed. It will clear the record of the shown field.
5.0 Recorded highest and lowest temperature with date
1. The recorded highest and lowest outdoor temperature will always be displayed on the screen.
When the outdoor temperature becomes higher or lower than the current record, the display
immediately updates to the new record. This data will be retained in the unit memory even if the
battery is removed or unit is reset.
2. To clear this memory, press “HISTORY CLEAR” in the monitor.
IMPORTANT: The recorded highest and lowest temperature is stored by date, therefore the calendar
MUST be set correctly before use of the unit.
6.0 ºC/ºF Switchable
The default measurement for temperature is ºC, press the ºC/ºF button to toggle between ℃ and
℉.
7.0 Language Switchable
Weather trivia questions have two languages of English and French. The default language for
questions is English, press the “LANGUAGE” button to toggle.
8.0 Signal Detection
The signal indicator on the monitor will display the following in the outdoor temperature window:
No Signal Detected
Signal Detected
Successful Reception