User's Manual
4
2.0 Getting Started:
2.1 BIOS Atmosphere 2.0:
+–
RESET button located at the rear of the main unit, the main unit is
now ready for use
2.2 Outdoor Remote Sensor
+–
3.0 Installation
3.1 BIOS Atmosphere 2.0
the back of the unit.
3.2 BIOS Atmosphere 2.0 sensor
The remote sensor should be securely mounted onto a horizontal surface.
NOTE: Transmission between the receiver and transmitter can reach up to 80m in an open area
without any interfering obstacles such as buildings, trees, vehicles, high voltage lines, etc.
3.3 Wind Sensor
Accessories
Plastic Base Screws and Washes Pole Washes & Screws,
X2 Round U-shape
bolts
NOTE: The remote sensor should be placed in a shaded area for accurate readings.
3.4 Mounting and Setup for the Wind Sensor
First, choose whether the wind sensor will be mounted vertically or horizontally (on a mast).
Make sure that you position the wind sensor in a free, open area that is not protected by
objects, which may distort or interfere with the wind (e.g. large buildings, trees, chimney,
etc.).
NOTE: The following contents have been included with your BIOS Atmosphere 2.0 for
mounting the wind sensor: