Wireless WEATHER CUBE 387BC rantie Ga Year an W a rra nty Instruction Manual
PM Indicator 9 00 BACK OF UNIT Battery compartment 12 / 24 Hour Time USB adapter port SET UP DOWN DOWN button Date SET button UP button Indoor Temperature FRONT OF SENSOR Outdoor Temperature Transmission Indication LED Battery Compartment BACK OF SENSOR
1.0 Care of Device • Avoid exposing units to extreme temperatures or severe shock. • Avoid contact with any corrosive materials such as perfume, alcohol or cleaning agents. • Do not subject the units to excessive force, shock, dust, temperature or humidity. Any of these conditions may shorten the life of the units. • Do no tamper with any of the internal components of these units. This will invalidate the warranty and may cause damage.
2.0 Setup Procedure 1. Insert the USB adapter into the Weather Cube, you can then plug the USB adapter into a USB port. Or you can power the Weather Cube with 3 x AAA batteries. 2. The Weather Cube will go through a sequence of numbers and then will beep once and display the TIME. 3. The Weather Cube will automatically be set to display the different screens in the following sequence: TIME (10 seconds) – DATE (2 seconds) – INDOOR TEMPERATURE (7 seconds) – OUTDOOR TEMPERATURE (7 seconds). 3.
4.0 Setting the Date 1. When the DATE is displayed on the Weather Cube, press and hold the SET button. NOTE: If the Weather Cube is not displaying the DATE, press the SET button to go through the different screens until DATE appears. 2. The year will flash, press the UP or DOWN button to select the year. Once selected, press the SET button to confirm. 3. Next the month will flash, press the UP or DOWN button to select the month. Once selected, press the SET button to confirm.
5. Once the alarms are set “ ” will flash. If you don’t want the alarms to activate on Saturday and Sunday, press the UP or DOWN button until “ ” is displayed. Press SET to confirm. Alarm will not activate on the weekend Alarm will activate on the weekend 6. Once the Weather Cube is in normal mode, the TIME screen will display differently, to indicate that an alarm is ON. Alarm ON indicator 7. When the alarm sounds, press any button to turn it off. The alarm will sound for 1 minute.
the SET button to go through the different screens until INDOOR TEMPERATURE appears. 2. The temperature will switch from Celsius to Fahrenheit. 7.0 Outdoor Temperature 1. When the OUTDOOR TEMPERATURE is displayed on the Weather Cube, press and hold the SET button. NOTE: If the Weather Cube is not displaying the OUTDOOR TEMPERATURE, press the SET button to go through the different screens until OUTDOOR TEMPERATURE appears. 2. “ ” will display on the screen. Insert 2 x AAA batteries into the outdoor sensor.
4. Neighbours using electrical devices operating on the 433MHz signal frequency can also cause interference. 5. Signals from other household devices, such as door bells and home security systems, may temporarily interfere with the units and cause reception failure. The transmission and reception of temperature reading will resume once the interference has stopped. The maximum transmission range is 30 metres (100 feet) from the remote sensor to the monitor (in open space).
Sequence ON --TIME (10 seconds), DATE (2 seconds), INDOOR TEMPERATURE (7 seconds), OUTDOOR TEMPERATURE (7 seconds). Sequence OFF 9.0 Power Saving Mode In power saving mode you can have the Weather Cube turn ON for 10 seconds and than turn OFF, or permanently stay ON. 1. To turn the power saving mode ON, in normal mode press the DOWN button, “ ” will ” will display. To turn the power saving mode OFF, press the DOWN button again, “ display. Press the SET button to confirm.
.0 LED Brightness You can adjust the brightness of the LED screen, by pressing and holding the UP button, when in normal mode. Press the UP button to switch between full brightness and half brightness. Press SET button to exit and return to normal mode. Full Brightness Half Brightness 11.0 Built in Battery There is 1 x CR2032 battery built into the Weather Cube. The battery keeps the time running when the Power Saving Mode is ON (see section 9.0).
Outdoor Sensor Accuracy -30°C to 60°C / -22°F to 140°F When temperature is above 60°C (140°F) screen will display HH. When temperature is below -30°C (-22°F) screen will display LL. +/- 2°C / 4°F Power Source Monitor 3 x AAA batteries 1.5V (not included), 1 x CR2032 (built-in), or USB Adapter (included) Outdoor Sensor 2 x AAA batteries 1.5V (not included) 13.
Thermor Ltd. 16975 Leslie Street Newmarket, ON L3Y 9A1 1-800-387-8520 14.0 FCC and IC Statement Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licence-exempt RSS standard(s).
Sans fil CUBE MÉTÉO 387BC rantie Ga Year an W a rra nty Mode d’emploi
Indicateur P.M.
1.0 Entretien de l’instrument • Évitez d’exposer les unités de l’instrument à des températures extrêmes ou à des chocs violents. • Évitez le contact avec des matières corrosives comme du parfum, de l’alcool ou des produits d’entretien. • Ne soumettez pas les unités de l’instrument à une force excessive, choc, poussière, température ou humidité. N’importe laquelle de ces conditions peut réduire la durée de vie utile de ces unités.
2.0 Procédure d’installation 1. Introduisez l’adaptateur USB au cube météo; vous pouvez ensuite brancher l’adaptateur USB à un port USB ou bien vous pouvez alimenter le cube météo avec 3 piles AAA. 2. Le cube météo effectuera une séquence de chiffres, émettra un bip et affichera l’HEURE. 3.
4.0 Réglage de la date 1. Lorsque la DATE s’affiche sur le cube météo, appuyez et tenez enfoncé le bouton SET. NOTE : Si le cube météo n’affiche pas la DATE, appuyez sur le bouton SET pour passer les différents écrans jusqu’à ce que la DATE s’affiche. 2. L’année clignotera; appuyez sur le bouton UP ou DOWN pour sélectionner l’année. Une fois l’année sélectionnée, appuyez sur le bouton SET pour confirmer. 3. Puis, le mois clignotera; appuyez sur le bouton UP ou DOWN pour choisir le mois.
bouton SET. Suivez les mêmes étapes pour régler les chiffres des minutes. 4. Suivez les mêmes étapes décrites ci-dessus pour régler l’alarme 2 et l’alarme 3. ” clignotera. Si vous ne voulez pas que les alarmes 5. Une fois les alarmes réglées “ s’activent le samedi et le dimanche, appuyez sur le bouton UP ou DOWN jusqu’à ce que “ ”s’affiche. Appuyez sur le bouton SET pour confirmer. Alarme ne sera pas activée la fin de semaine Alarme sera activée la fin de semaine 6.
6.0 Température intérieure 1. Quand la TEMPÉRATURE INTÉRIEURE s’affiche sur le cube météo, appuyez et tenez enfoncé le bouton DOWN. NOTE : Si le cube météo n’affiche pas la TEMPÉRATURE INTÉRIEURE, appuyez sur le bouton SET pour passer les différents écrans jusqu’à ce que la TEMPÉRATURE INTÉRIEURE s’affiche. 2. La température commutera de Celsius à Fahrenheit. 7.0 Température extérieure 1. Quand la TEMPÉRATURE EXTÉRIEURE s’affiche sur le cube météo, appuyez et tenez enfoncé le bouton SET.
2. Évitez de déposer le moniteur sur ou à proximité immédiate de châssis de fenêtres métalliques. 3. L’utilisation d’autres produits électriques tels que casques d’écoute ou haut-parleurs fonctionnant sur la même fréquence (433 MHz) peuvent empêcher la transmission et la réception normales du signal. 4. Des appareils électriques fonctionnant sur la même fréquence de signal de 433 MHz dans le voisinage peuvent aussi causer de l’interférence. 5.
sur le bouton UP jusqu’à ce que “ SET pour confirmer. ” s’affiche. Appuyez de nouveau sur le bouton Séquence ACTIVÉE --HEURE (10 secondes), DATE (2 secondes) TEMPÉRATURE INTÉRIEURE (7 secondes) TEMPÉRATURE EXTÉRIEURE (7 secondes) Séquence DÉSACTIVÉE 9.0 Mode d’économie d’énergie Dans le mode d’économie d’énergie, vous avez l’option d’avoir le cube météo ALLUMÉ pendant 10 secondes puis FERMÉ, ou ALLUMÉ de façon permanente. 1. En mode normal, appuyez sur le bouton DOWN.
Mode d’économie d’énergie activé (ON---) Le cube météo s’allumera pendant 10 secondes puis s’éteindra. Pour activer le cube météo, taper dans vos mains, faire du bruit ou toucher la tête du cube. Mode d’économie d’énergie désactivé (OFF---) L’afficheur demeurera activé de façon permanente. 10.0 LUMINOSITÉ DEL En mode normal, vous pouvez régler la luminosité de l’écran DEL en appuyant et en tenant enfoncé le bouton UP.
12.0 Spécifications du produit Plage de mesure de la température 0 °C à 50 °C / 32 °F à 122 °F Cube météo Capteur extérieur Précision Si la température est supérieure à 50 °C (122 °F), l’écran affichera HH. Si la température est inférieure à 0 °C (32 °F), l’écran affichera LL. -30 °C à 60 °C / -22 °F à 140 °F Si la température est supérieure à 60 °C (140 °F), l’écran affichera HH. Si la température est inférieure à -30 °C (-22 °F), l’écran affichera LL.
13.0 Garantie limitée d’un an Si ce produit se révèle défectueux en raison de vices de matériaux ou de fabrication dans l’année qui suit la date d’achat, veuillez le renvoyer à l’adresse spécifiée ci-dessous. Le produit sera réparé ou remplacé, sans frais, après réception du produit port payé et d’un montant de 5,00 $ pour couvrir les frais de manutention, emballage et port de retour.
NOTE : Cet équipement a été testé et rencontre les limites de la Classe B des appareils numériques, conformément à la Clause 15 des règlements de la FCC. Ces limites ont été établies pour fournir une protection raisonnable contre une interférence nuisible dans une installation résidentielle.