Manual

Safety Tips
,& The use of alcohol, prescription or nonprescription drugs may impair the consumer's
ability to properly assemble or safely operate the appliance,
,& When grill is not in use, disconnect 1 Ib, cylinder or turn off20 Ib, cylinder.
,& Never move grill while in operation or still hot, Allow the appliance to cool before moving
or storing,
,& Use only tools supplied or plastic tools,
,& Maximum load for side shelf is 10 Ibs,
,& The regulator may make a humming or whistling noise during operation, This will not
affect safety or use of grill,
,& If you have a grill problem see the Troubleshooting Section,
,& Light burners, check to make sure they are lit, close the lid and warm up grill on high for 10
minutes, Curing of paint and parts will produce an odor only on first lighting,
Ignitor Check
Regulator/Valve must be in "Off" position. Remove cooking grid, Press ignitor button
rapidly, "Click" should be heard and spark seen each time between burner and electrode,
Replace cooking grid, See Troubleshooting if no click or spark,
Ignitor Lighting
1, Push regulator/valve counterclockwise to "PUSH TO TURN ON" (A), push in, then turn
to "LIGHTING POSITION" (B),
2, Push ignitor button rapidly to light, Use viewing glass (C) to be sure burner lights
and stays lit,
3, If ignitor does not work, follow match lighting instructions,
Regulator/Valve
Viewing
glass
Fire & ice o25