Application Guide

are an

 Before first use, and as soon as possible after each use, wash all parts with warm,

soapy water. Rinse all parts thoroughly and allow time to dry.

 Contents should not be left in the container for longer than 24 hours. As soon as

possible after each and every use, wash all parts with warm, soapy water. Rinse all

parts thoroughly with clean water. Allow all parts to dry completely prior to next use or

storage

 DO NOT use abrasive cleaners or scrubbers since they may dull the finish.

 DO NOT use bleach or cleaners containing chlorine on any parts of the product.

 This product is top-rack dishwasher safe; however, hand washing is recommended as

the dishwasher uses harsher detergents and hot water that may affect the appearance

of your product.

 Residual liquids, foods, or other contents may become trapped between product

components, such as lid parts, container parts, gaskets (flexible band around lid

and/or stopper), or straws (if present in the product). Although this product is top-rack

dishwasher safe, hand washing is recommended to ensure that all parts of the product

are thoroughly cleaned.

 For maximum thermal efficiency, preheat or pre-chill the product just prior to use. Fill

with hot/cold tap water, attach lid, let stand 5 to 10 minutes and empty water. After

filling container with contents, re-cover with lid to increase thermal efficiency. Never

use a microwave, conventional oven, or other heat source for this purpose.

Sealing Lid with Tea Hook

Image for reference only: actual product may vary

1. Remove lid (E) by twisting counterclockwise.

2. Remove retainer (A) by turning it counterclockwise and lifting up.

3. Remove retainer gasket (B) from retainer (A).

PAGE 1
are an        Before first use, and as soon as possible after each use, wash all parts with warm, soapy water. Rinse all parts thoroughly and allow time to dry. Contents should not be left in the container for longer than 24 hours. As soon as possible after each and every use, wash all parts with warm, soapy water. Rinse all parts thoroughly with clean water. Allow all parts to dry completely prior to next use or storage DO NOT use abrasive cleaners or scrubbers since they may dull the finish.
PAGE 2
4. Remove sealing disk (C). 5. Remove main gasket (D) from underside of lid (E). 6. Wash all parts separately, then re-assemble: a. Main gasket (D) as shown in enlarged diagram above b. Sealing disk (C) with smooth side facing lid c. Retainer gasket (B) on retainer (A) d. Push retainer (A) onto lid post (E1) and turn clockwise to lock. 7. Fill container with contents. Do not overfill: Leave space for the lid (E), to avoid overflow. 8. Replace the lid (E) onto the mug or tumbler by twisting it clockwise. 9.
PAGE 3
 DO NOT use to store or carry carbonated drinks or dry ice. This may cause lid/stopper and contents to eject forcefully or leak. Thermos L.L.C. warrants this Genuine Thermos Brand product to be free from defects in material or workmanship for five years from date of purchase. This warranty does not cover ordinary wear and tear or color fading, or any condition affected by abuse, neglect, alteration, accident or improper use or maintenance.