Therma Waterproof Therma Differential Operating Instructions
INSTRUMENT OPERATION - Connect probes via the socket(s) located at the top of the instrument. (The Therma Waterproof and Therma Differential use a miniature type K thermocouple connector/s). Switch the instrument on and apply the tip of the probe to the substance or medium to be measured. The instrument reading may take a few seconds to stabilize, depending on the nature of the measurement and sensitivity of the probe.
MODE - THERMA DIFFERENTIAL ONLY - Press the MODE button to scroll through T1, T2 or T1 - T2. Press the MODE button for three seconds to reset the differential reading to 0.0°F/°C; null will flash on the display. CHANGE FROM FAHRENHEIT TO CELSIUS - Press and hold ON/OFF button for five seconds at start-up. GUARANTEE - This instrument carries a two-year warranty against defects in either components or workmanship.
INSTRUMENT RECORD CARD Model Order Code Therma Waterproof 232-101 Therma Differential 231-022 CALIBRATION 32°F (0°C) 212°F (100°C) Thermocouple Serial no.______________________________________ Calibrated by___________________ Date_____________ This instrument has been checked or calibrated against reference instrument(s) calibrated by a UKAS Accredited Calibration Laboratory. P-13-006-02-a 1762 W. 20 S. #100, Lindon, UT 84042 Ph: 801-756-7705 Fax: 801-756-8948 www.thermoworks.
