Saf-T-Log Paperless HACCP Thermometer Quick Start Guide
QUICK START GUIDE FOR SAF-T-LOG PAPERLESS HACCP THERMOMETER • Remove old versions of Saf-T-Log software prior to installing new version (your data files will not be removed or lost). • Install the software by following on-screen instructions BEFORE connecting the Saf-T-Log instrument to the PC (see below for more information). PC SOFTWARE INSTALLATION • Please check for software updates at www.thermoworks .com/software before installing. A newer version maybe available. • Place the CD in the CD drive.
• Add your custom information to the report layout in the 'Format Report' tab. • Click the 'Settings' button to select the directory to save reports to, set the default date format, temperature units and time zone. • Save the Checklist. • Connect a Saf-T-Log instrument to the PC via the supplied USB cable and click the 'Send Checklist to Saf-T-Log' button. • The date and time within the Saf-T-Log instrument will be set to match the date and time of the PC it is connected to.
BACKLIGHT • With the instrument switched on, press the 'Backlight' button. • The backlight will automatically turn off after 20 seconds. BATTERY REPLACEMENT • Replace the batteries (3 x AAA) when the battery symbol in the display shows empty. • After the new batteries are fitted the instrument must be connected to a computer to configure the time and date. • The user will be asked to select a checklist to use for the configuration.
