Owner Manual
Owner’s Manual 5
Freezer compartment:
The freezer compartment is made to keep pre-frozen food frozen and not to quick freeze food. Keep pre-frozen foods in the freezer
compartment.
Do not put other items on the ice tray while the water is freezing. The water freezes more rapidly if the thermostat is
at the coldest temperature setting.
NOTICE
Door latch for travel and storage:
During travel, the door latch prevents the door from opening. There are no chains,
slides, or any devices that you must engage.
During storage, the door latch prevents the door from completely closing. Use it to
prevent odors when the refrigerator is shut down for a long period of time.
To use the door latch for storage (See Art00979):
- Open the door just so the door latch [161] is between the ribs [166] of the latch
plate [162].
161
166
162
Art00979
Operating the Refrigerator Controls
LED Control Panel:
The control display panel is located between the freezer door and the fresh food door (See Art02518).
On/Off switch .....................................................................................30
Selector switch ................................................................................. 207
Conrmation button......................................................................... 307
Mode indicator ................................................................................ 276
Cooling level indicators ................................................................... 308
Turning the refrigerator on:
- Press and hold the On/Off switch [30] for one (1) second.
- Part of the On/Off switch appears green.
- The current mode indicator [276] and the cooling level indicator [308] illuminate and will dim after ten (10) seconds.
- The light in the On/Off switch will remain on.
To check the operating mode and the cooling level at any time, briey press the On/Off switch. The mode indicator
and the cooling level indicator illuminate for ten (10) seconds.
Selecting the operating mode:
- Turn the refrigerator on.
- Press and hold the conrmation button [307] for two (2) seconds.
- The mode indicator will start to ash.
- Press either of the selector switches [207] until the desired mode indicator illuminates.
- Press the conrmation button [307] twice to start operation in the desired mode.
NOTICE
Art02518
30
276
307
308
207