BUILD IN APPLIANCES FOR USE WITH LIQUIFIED PETROLEUM GAS CAUTION – ALL OUTER SURFACES WILL GET HOT WHEN IN USE Models S ~ OG72000 SD Duplex Oven&Grill S ~ OV72000 SD Oven Only USER AND INSTALLATION INSTRUCTIONS PLEASE READ THOROUGHLY AND KEEP FOR FUTURE REFERENCE INS 1002– Issue 0 FOR USE IN GB, CH, ES, PT, IT, BE, FR, IE, DK, FI, GR, NL, NO, DE, SE, SL SPINFLO LIMITED (Part of the Thetford Group) Unit 19, Oakham Drive, Parkwood Industrial Estate Rutland Road, Sheffield S3 9QX, ENGLAND.
IMPORTANT • Ensure that all electrical cables are routed directly away and well clear of this appliance and other heat sources. • If it is not possible to install the appliance as per our recommendations, refer to Thetford / Spinflo for guidance. IMPORTANT CONSTRUCTION MATERIALS:ALL COOKING APPLIANCES BECOME HOT DURING USE. IT IS IMPORTANT THE INSTALLER VERIFIES THE FURNITURE CONSTRUCTION MATERIAL AND THAT IT IS SUITABLE FOR THE APPLICATION - I.E.
CONTENTS User’s Section Specification Introduction Operation of the Door Using the Grill Using the Oven ………………………………………………… ………………………………………………… ………………………………………………… ………………………………………………… ………………………………………………… 6 7 9 10 12 Installation and Servicing Installation Dimensions Specification Installation Instructions Operation Maintenance & Servicing ………………………………………………… ………………………………………………… ………………………………………………… ………………………………………………… ………………………………………………… 2 6 15 8 18 5
SPECIFICATION Model External Dimensions, mm (HxWxD) Oven Capacity, Litres (HxWxD) No. of tray positions Heat input, kW Total heat input Hotplate Burners Grill burner heat input Oven burner heat input Injector size, mm Grill burner Oven burner Bypass size, mm Grill control Oven control Spark ignition (where fitted) Fan Cooling System Operating Voltage Rated Voltage Rated Current Power Consumption SD DUPLEX S~OG72000 408 x 527 x 530mm SD OVEN ONLY S~OV72000 408 x 527 x 530mm 32.4 (209 x 428 x 362) 32.
INTRODUCTION This appliance must be installed in accordance with the local, national and European regulations in force. Particular attention shall be given to the requirements regarding ventilation. Read the instructions before installing or using the appliance The appliance is designed for either high or low level installations. Failure to install the appliance correctly could invalidate any warranty or liability claims and lead to prosecution.
OPERATION IMPORTANT • This appliance is approved for use with LPG gas; Propane and Butane. We recommend using Propane gas for this appliance. • Butane gas may be used, although the performance of the appliance maybe compromised when the ambient temperature is below 10°C. • Butane gas should not be used when the ambient temperature is below 5°C. The burners on this appliance have fixed aeration and no adjustment is required.
OPERATION WARNING Pans or other utensils MUST NOT be placed on the door when in its open position. Operation of the Door This appliance is fitted with our unique slide under door. As you open the door fully, it slides neatly under the oven. This feature maximises the space in the kitchen area by reducing the protruding door, giving easy access to the inside of the oven. To open the door:1. Pull the handle forward and down, as with any other drop down door 2.
OPERATION WARNING • The grill area can get hot when the oven is in use, even if the grill is switched off. • Care should be taken when removing pans from the grill, i.e. use of oven gloves, and by making use of the removal grill pan handle. IMPORTANT • The grill pan supplied is multi functional, for use in grill or oven. • The handle design allows removal or insertion whilst the pan is in use. • Always remove the handle when the pan is in use. • The grill MUST only be used with the door open.
OPERATION 5. Although the grill does heat up quickly, it is recommended that a few minutes preheat be allowed. 6. Flame Failure Device (FFD): the grill burner is fitted with a flame sensing probe, which will automatically cut off the gas supply in the event of the flame going out. In the event of the burner flames being accidentally extinguished, turn off the burner control and do not attempt to re-ignite the burner for at least one minute. 7.
OPERATION IMPORTANT • The appliance is fitted with a fan cooling system. The cooling fan will automatically switch on after lighting the grill or oven burner. • The fan will automatically switch off a few minutes after the burner is extinguished, when the front of the appliance has cooled sufficiently. Using the Oven OFF ON (FULL) 1. Ensure gas cylinder/supply is connected and turned on. In the event of a gas smell turn off at gas cylinder/mains and contact supplier. 2.
OPERATION 6. To turn off: turn the control knob clockwise until the circle on the control knob is aligned with the dot on the control panel. 7. To remove a shelf, pull forward until it stops, raise at front and remove. Oven Temperature Control The temperature in the oven is controlled by a thermostatic gas tap and is variable over the range 130°C to 240°C. Approximate temperatures for the settings on the control knob are shown in the table below.
OPERATION Do's And Don'ts DO read the user instructions carefully before using the appliance for the first time. DO allow the oven to heat before using for the first time, in order to expelany smells before the introduction of food. DO clean the appliance regularly. DO remove spills as soon as they occur. DO always use oven gloves when removing food shelves and trays from the oven. DO check that controls are in the off position when finished. DO NOT allow children near the cooker when in use.
INSTALLATION Regulations and Standards In your own interest of safety, it is law that all gas appliances are installed and serviced by an authorized gas technician who will undertake work to safe and satisfactory standards. Failure to install the appliance correctly could invalidate any warranty or liability claims and lead to prosecution. This appliance shall be installed in accordance with the local and National/European standards in force.
INSTALLATION Position The performance of this appliance meets the approval requirements of the European Standard for Domestic Cooking Appliances (EN30) which specifies a maximum allowable temperature rise of the furniture into which the appliance is installed of 65oC above the ambient temperature. To ensure compliance with the standard it is important the installation follows the minimum dimensions as shown in this manual.
INSTALLATION CONNECTION Gas Connection The gas connection is made to a 8mm Ø inlet pipe beneath and to the front of the appliance depending on exact specification. Prior to connection remove the plastic protection plug from the fitting. It is recommended that the appliance be connected by copper pipe, rubber tubing MUST NOT be used. The burners on this appliance have fixed aeration and no adjustment is necessary. IMPORTANT • This appliance is approved for use with LPG gas; Propane and Butane.
MAINTENANCE & SERVICING IMPORTANT • Shut off gas supply at isolating valve, switch off electric supply and ensure all parts are cool before cleaning or servicing • All servicing must be carried out by an approved competent person. • After each service the appliance must be checked for gas soundness • This appliance must not be modified or adjusted unless authorized and carried out by the manufacturer or his representative.
MAINTENANCE & SERVICING 7. Oven burner injector (No59) Open the oven door and unscrew the burner retaining screw, slide the burner to the left and lift out. The injector is exposed to the right hand side of the cut out. Unscrew the injector. 8. Thermocouple replacement Disconnect from gas supply (1). Remove appliance from housing (2).