Owner manual

Application Tag Commands

Command Set 109

timeout of 1000 ms. Note the Options field, no metadata is requested unlike the previous

example.

EPC ID = 0x0123456789ABCDEF01234567.

The User Memory bank is not locked so the Access Password is zero

The response to this Read Data command example is:

Note: Try changing the value at this memory location with the Write Tag Data Examples showing

writing to the same tag.

Get Tag Data and Meta Data

In addition to getting the tag data returned you can also get Tag Read Meta Data for the

found tag. This version of Read Tag Data requires bit 4 of the Option flag to be set and

takes an additional Metadata Flags field which defines what metadata will be returned.

The following table lists the supported values for these fields.

FF 1A 28 03 E8 01 03 00 00 00 02 04 00 00 00 00

SOH Lengt

OpCode Time-

out (ms)

Option Read

MemBank

Read Address Word-

Count

Access Password

60 01 23 45 67 89 AB CD EF 01 23 45 67 7A C1

Select

Data

Length

Select Data CRC

FF 09 28 00 00 01 AA BB CC DD 00 00 00 00 E7 54

SOH Length OpCod

Status Option Data Read CRC