TMX08-EX IoT Wireless Device User Manual
1 Product Introduction This product is used to collect all sensor data from Ice Merchandiser. It can automatically provide the location, temperature, volume and through LTE-M communication module the device will send data to the ice merchandiser operation platform. 2 Function ➢ Location: The Ice Merchandiser operation company can check the location of the ice merchandiser to avoid equipment missing.
Device Installation Guidance: Device Installation Steps: 1) Connection the Main cable to the Device like below
2) Connection the Power Adaptor to the main cable
3) Connection the Current Draw Sensor to the main cable 4) Connection the ultrasonic/temperature to the main cable
The ultrasonic/temperature cable should go through the drilled hole of the merchandiser and connect to the sensor which need to be fixed on the inner roof of the merchandiser.
5) Connection the lidar sensor to the main cable
The lidar sensor cable should go through the drilled hole of the merchandiser and connect to the sensor which need to be fixed on the inner roof of the merchandiser. 6) Connection the GPS antenna and Cellular antenna to the device.
7) Fix the bracket to the top of the merchandiser, then fasten the device with cables to the bracket. 8) Plug the power adaptor to the power socket. 5 Function Test After the product is installed and connected correctly, from platform side, we can read all related data so that we can judge the overall status of the equipment is good or not.
6 Performance Item Parameter Size 129mm*80mm*36mm Working Voltage 6~18VDC Current (avg. working) <125mA@12V Current (Static) <45mA@12V Working Temp. -20 C°~+75C° 7 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.