Operating Manual

GENERAL INFORMATION
The Orderman has been specially designed for the
food & beverage industry. It is an electronic radio
ordering pad component of an ordering system.
An ordering system, at a minimum, consists of an
Orderman, a radio frequency basis station and a host
computer with an application program.
The application program on the host computer
controls the entire dialog to the Orderman.
Only the standard unit is described in this manual. If
the manufacturer of the utilized application program
had his requirements adapted to the unit, refer to this
in the description of the application program.
Maintenance
Page 16
MAINTENANCE
High Temperatures
Do not expose the Orderman to extremely warm
irradiation (i.e., direct sun light, heaters).
Repairs
Never attempt to disassemble the Orderman. There
are no parts in the interior which can be serviced by a
non-expert.
Contacts
Never touch the contacts on the Orderman - danger
of breakage.
Cleaning
Wipe off the Ordermann with a clean, soft cloth.
Never use any cleaning agents, chemicals or
compressed air to remove dust.
Liquids
The Orderman is splashproof (IP 54) and liquid-
resistant up to the seam.
If any liquid penetrates into the Orderman, it can
become damaged in this way. Should liquid have
penetrated into the unit, it must be examined by our
Customer Service for any possible damages.
General Information
Page 3
Maintenance
Page 16
General Information
Page 3
GENERAL INFORMATION
The Orderman has been specially designed for the
food & beverage industry. It is an electronic radio
ordering pad component of an ordering system.
An ordering system, at a minimum, consists of an
Orderman, a radio frequency basis station and a host
computer with an application program.
The application program on the host computer
controls the entire dialog to the Orderman.
Only the standard unit is described in this manual. If
the manufacturer of the utilized application program
had his requirements adapted to the unit, refer to this
in the description of the application program.
MAINTENANCE
High Temperatures
Do not expose the Orderman to extremely warm
irradiation (i.e., direct sun light, heaters).
Repairs
Never attempt to disassemble the Orderman. There
are no parts in the interior which can be serviced by a
non-expert.
Contacts
Never touch the contacts on the Orderman - danger
of breakage.
Cleaning
Wipe off the Ordermann with a clean, soft cloth.
Never use any cleaning agents, chemicals or
compressed air to remove dust.
Liquids
The Orderman is splashproof (IP 54) and liquid-
resistant up to the seam.
If any liquid penetrates into the Orderman, it can
become damaged in this way. Should liquid have
penetrated into the unit, it must be examined by our
Customer Service for any possible damages.
®
ORDERMAN
think
dig
High Tech Solutions
think
dig
High Tech Solutions
®
ORDERMAN
®
ORDERMAN
think
dig
High Tech Solutions
think
dig
High Tech Solutions
®
ORDERMAN