User's Manual

ORDERMAN



-Touch Terminal Manuale d’uso
- 9 -
Italiano
Files copied to the
Flashdisk directory are
save in case of a system
restart.
The Flashdisk, the Harddisk (optional Com-
pactFlash card) can be used to save your
data.
A
ll other directorys are placed in RAMDisk
and are not safe in case of a system restart.
Caution
After committing changes in the Systemsettings call the Registry Backup. See
„5.7 Save system settings / changes in the registry
“
The ORDERMAN

Touch Terminal consists of a RAMdisk, a Flashdisk and an optional
Harddisk (CompactFlash card).
This is important if you want to make changes to the system (e.g. Create a link on the Desk-
top), the registry or install any software.
All settings, files and folders except the Flashdisk and the Harddisk (CompactFlash card) are
saved in RAMdisk. This means everything installed into RAMdisk that don’t belong to the
default image of WindowsCE is lost after a restart of the system or a power failure (blackout).
5 HowTo
5.1 Connect the OM-TT to a Local Area Network
Connect the ORDERMAN

Touch Terminal to your network by using a network cable.
Caution
• Although you install something to the Flashdisk or Harddisk with an instal-
lation routine, some files may be copied to the Windows directory (RAM-
Disk). To avoid to loose this data you have to run Installation Backup (Start
=> Programs => Installation Backup).
• If you change settings e.g. if you change the background image on the
Desktop, you have to save the registry with the Registry Backup tool
(Start => Programs => Registry Backup).
• If you don’t use the installed registry editor to change the registry you have
to save the registry with the Registry Backup tool witch can be found in the
Programs section of the Start Menu (Start => Programs => Registry
Backup).