User Guide

Quick Start Guide
EN
Prerequisite conditions:
1. Go to http://www.mythinkcar.com to download the update tool
and install it on the computer.
2. System requirements: Windows XP, 7, 8 or Windows 10.
Follow the steps below to update the tool:
1. Note down the Serial Number and Register code.
1).Connect one end of the USB cable to your tool, and the other end
on the computer.
2).After the tool has powered up and entered the main menu screen,
move the highlight bar on the "Help" icon and press [OK].
Register & Update
3). Highlight the "Tool Information" in Fig. 1 and press [OK].
4). Write down the Serial Number and Register code for later use.
2. Register the scanner on the update tool (for initial use).
1).Launch the update tool, a screen similar to Fig. 3 will appear:
*Note: Once the S/N is entered, “Restore System” becomes activated,
which is used to restore system if a new memory card is replaced.
2).Select the target language and enter the Product Serial Number,
click [Device Upgrade], a screen similar to Fig. 4 will appear.
Help
DLC Location Information
Abbreviation
Tool Information
About OBD
Upgrade Information
3 / 5
1
Help
DLC Location Information
Abbreviation
Tool Information
About OBD
Upgrade Information
3 / 5
1
Tool Information
Boot version:
Display program version:
Diagnostic program version:
Diagnostic library version:
Serial Number:
Register Code:
2
V02.01
V02.00
V10.50
V02.24
************
************
Select Language
Product Serial Number
Device Upgrade
English
3