User Manual

www.mythinkcar.com

THINKTOOL Pros

Before programming, please double-check the following:

Check the vehicle, turn oﬀ the engine, and in non-ignition state.

Put the transmission into P or N position.

Turn oﬀ all electrical equipment, such as air conditioner, headlights, turn signals, audio, etc. Otherwise,

unstable automotive currents can cause programming interruptions.

Connect the vehicle to an approved programmed (or stable) battery charger to ensure that the battery

voltage is between 13V and 14V.

Diagnose the vehicle, troubleshoot possible problems and clear the vehicle DTC.

When programming, do not start or move any part of the vehicle modules related to programming. If it is

started, it may cause programming disruption, which might damage the modules.

Make sure that THINKTOOL Pros has suﬃ cient power.

For communication and program stability, please connect ThinkTool Pro and diagnostic connector with a

wired connection.

The operation of programming is at your own risk. Besides, not all vehicle problems can be resolved via

programming, please make your decision carefully.

During programming, make sure not to abnormally terminate the process, otherwise it will result in

serious consequences such as the failure of the ECU.

Generally, programming of the vehicle computer need go through the following steps (Varied from vehicles.

The programming processes of vehicles may be complex, please strictly follow the screen instructions.):

Tap “Programming”

Select system

Select “Programming” function menu

Read ﬂ ashing notes and risks carefully

Select the diagnostic software version

Select speciﬁ c software for the vehicle

model

Start downloading programming ﬁ les

from server

Start programming

Programming completed