Product Info

www.thinkcar.com

THINKTOOL X10

2.3 Function menu

After diagnosis host is started, the system automatically enters the home page:

THINKTOOL X10 mainly comprises the following function options:

• [Remote]: the user and the remote expert technician communicate the diagnosis requirements

through this module, and the expert technician can use the third-party diagnostic equipment to provide

professional remote diagnosis support after conﬁ rming the operation.

• [Diagnosis]: including intelligent diagnosis and traditional diagnosis. It can detect the electronic control

system faults of most high, middle and low class models of Asian, European, and American vehicles.

The diagnostic functions include fault code reading, fault code clearing, data stream reading, action

testing, special functions, etc.

• [Maintenance]: it supports matching, code setting and common special functions of programmable

modules of most models: AC System Relearn/Initialization, AdBlue Reset, AFS Reset, Airbag Reset,

A/F Reset, Bleeding, BAT. Match, GearBox Learn, Brake Reset, Coolant Bleed, DPF Reg., EGR

Adaption, Engine Power Balance Monitoring, Elec. Throttle Rlrn, Gear Learn, Gas Particulate Filter

Regeneration, High Voltate Battery Diagnostics, Intelligent Cruise Control System, Immo, Injector,

Language Change, Motor Angle Calibration, NOx Sensor Reset, ODO Meter, Oil Reset, SAS Reset,

Seats Calibration, Stop/Start Reset, Sun Roof, Sus Reset, TPMS Reset, Transport Mode, Tyre Reset,

Windows Calibration, IMMO PROG(optional).

• [Upgrade]: the model diagnosis software, client and ﬁ rmware can be upgraded online with one key.

• [ThinkStore]:ThinkStore is launched by THINKCAR, including software and hardware products.

• [Message]: to display list of contacted merchants and relevant information.

• [Personal]: In this function, includes machine settings, account management, information query, etc.

• [Others]: includes ASDS, thinkﬁ le, tire pressure, remote assistance, diagnosis feedback, Repair Info

and use guidelines.

2.4 Recharge the host

The host is recharged by the following steps:

1. Connect one end of the power cable to the USB socket of the power adapter.

2. Connect the other end of the power cable to the charge jack at the top of the host.

3. Plug the charger into the power socket and start charging.

4. When the battery symbol shows , it means charging is ﬁ nished, and disconnect the power socket

of the host.

Function