Product Info

www.thinkcar.com
THINKTOOL X10
18
9) After the maintenance service is fi nished, the maintenance terminal can view the report and confi rm
the order through the dialog window.
10) After the remote diagnosis is completed, remove the network cable and turn off the Ethernet
switch
, so as to terminate remote diagnosis.
！
Note: in "Message" on the home page, you can view the records of the servers you contacted.
5. Maintenance
THINKTOOL X10 supports maintenance service of 35 models, and maintenance services applicable to
diff erent models are somehow diff erent.
5.1 Oil Reset
The vehicle service light indicates that the vehicle needs repair and maintenance. After the maintenance,
the mileage or driving time should be reset to zero, then the maintenance light will go out, and the
system will start a new maintenance cycle.
5.2 Elec. Throttle Rlrn
Throttle learning is to use the vehicle decoder to initialize the throttle actuator, so that the learning value
of ECU returns to the initial state, and then the throttle (or idle motor) action can be more accurately
controlled and adjusted to regulate the air intake. Situations where throttle matching is required:
a) After replacing the ECU, the ECU does not store the characteristics related to throttle operation, and
throttle matching is required.