Product Info

www.thinkcar.com
THINKTOOL X10
22
5.21 Stop/Start Reset
By swiping the trip computer hiding, the vehicle can enable or disable the automatic start-stop function
(provided that the vehicle has the hiding function, supported by the hardware).
5.22 NOx Sensor Reset
It is a sensor used to detect nitrogen oxide (NOx) content in engine exhaust. Re-initialization of NOX
fault and replacement of NOX catalytic converter require resetting the catalytic converter learning value
stored in the engine ECU.
5.23 AdBlue Reset
Urea reset is needed after diesel tail gas treatment (vehicle urea) is replaced or refi lled.
5.24 Seats Calibration
It is for seat change with memory function, and matching after maintenance.
5.25 Coolant Bleed
The electronic water pump is activated with the function before exhaust of the cooling system.
5.26 Tyre Reset
For setting of tire sizes after tire modifi cation or replacement.
5.27 Windows Calibration
To perform door and window matching to restore the initial memory of the ECU and restore the
automatic rise and fall function of the electric window.
5.28 Language Change
To change the language of central control system of vehicle.
5.29 AC System Relearn/Initialization
If the ECU or actuator of the vehicle air conditioner is replaced, or the memory of the ECU memory is
lost, air conditioner initialization learning is needed.
5.30 Intelligent Cruise Control System
For replacement of intelligent cruise control system of vehicle and matching after repairing.
5.31 Engine Power Balance Monitoring
At the power stroke of each cylinder, power balance monitors crankshaft acceleration, thus determining
the relative power provided by each cylinder.
5.32 Gas Particulate Filter Regeneration
After long-term use of the particle catcher, fuel consumption can be increased, engine output power can
be decreased, then in this case, the GPF needs to be replaced or regenerated.