Product Info

www.thinkcar.com
THINKTOOL X10
29
9.11 Business management
To add the owner information of the merchant, which will be displayed to the owner in the diagnosis
report.
9.12 Customer management
To manage client information of all diagnosed vehicles, displayed in sequence here.
9.13 Setting
To perform system settings, such as diagnostic unit setting, language and time zone settings, cache
clearing, and mode switch.
10. FAQ
Q: Can the same type of charger be used to charge the host?
A: No, please charge with the attached charger. The Company is not responsible for any damage or
economic loss caused by the use of adapters not provided by THINKCAR.
Q: How can the electricity be saved?
A: Turn off the screen when the equipment is not used. The screen standby time shall be shortened. The
screen brightness shall be reduced.
Q: Why cannot the host power on after charging?
Possible cause Solution
The equipment stands by for a log
time, and the battery is under power
Charge for more than 2h first, and then power on the
equipment.
Adapter problem
If there is any quality problem, please contact distributors
or after-sales service of THINKCAR.
Q: Why cannot the product be registered?
Possible cause Solution
The equipment is not connected with
the network
Make sure that the equipment is connected with the
network normally.
Notes that your email has been
registered.
Use another email for register or log in with the username
registered by the email (If you forget the username, you
can retrieve it by email)
The email didn’t receive the verifi cation
code during the registration
Check if the email is correct and get the verifi cation code
again