Setup Guide
Table Of Contents
- Notices
- About Thinkify, LLC
- A Quick RFID Introduction
- Thinkify Reader Protocol Overview
- Command Reference
- Summary
- "A" – RX Amplifier Control
- "BOOTLOADER" – Enter Bootloader
- "C" – Low-Level Chip Control Registers
- "F" – RX Filter Control
- "G" – GPIO Settings
- “I” – Inventory Control
- "K" – Kill, Lock, Access Descriptors
- “M" – MASK / SELECT control
- “NM" – Macro Control
- "P" – PROTOCOL control (Gen2 Air protocol)
- "R" – RF Control
- "RP" and "RM" – Multiplexing (Antenna Control)
- "T" – Initiate INVENTORY
- "X" – eXtra Data Read and Write Descriptor Control
"C" – Low-Level Chip Control Registers
Sub
Command Description
Legal Values
for SET
Register Description
0x13
0x14 CLSYS ANAOUT (word)
0x15 MOD control (word)
0x16 PLL main control (word)
0x17 PLL aux control (word)
0x18 DAC reg (byte)
0x19
0x1A RXLen1 (byte)
0x1B RXLen2 (byte)
0x1C
0x1D TXLEN1 (byte)
0x1E TXLEN2 (byte)
CS
Report all shadow registers
-
CR
Resets all registers to program default.
-
“C” Command Examples
Get All Control Register Values
READY>c
ICREGISTER00=00
ICREGISTER01=00
ICREGISTER02=00
ICREGISTER03=00
ICREGISTER04=00
…
ICREGISTER3C=00
ICREGISTER3D=00
ICREGISTER3E=00
Get All Shadow Register Values
READY>cs
ICSHADOW=00=00
ICSHADOW=01=00
ICSHADOW=02=32
ICSHADOW=03=6B
ICSHADOW=04=05
…
ICSHADOW=3C=01
ICSHADOW=3D=00
ICSHADOW=3E=00
23