Owner's Manual

Settings
29
6.3 Setting recording features
From the mobile viewer, tap Dash Cam settings
>
Record Settings to manage the recording features settings.
Options Description
Continuous Mode Incident
Recording Sensitivity
You can set the detection sensitivity for recording when an impact is detected while
driving. When you set the sensitivity, you must consider the road conditions, traffic
situation, or your driving style. Select from Disabled/Lowest/Low/Mid/High for the
sensitivity.
Parking Mode
You can set the operating mode of the product while the vehicle is parked. Select from
Disabled/Motion Detection/Energy Saving for the parking mode.
Impact Sensitivity in
Parking Mode
You can set the detection sensitivity for recording when impact is detected while
parking. Select from Lowest/Low/Mid/High/Highest for the sensitivity.
Motion Detection
Sensitivity
The Motion detection feature records a video when a moving object is detected near
your vehicle. Select from Lowest/Low/Mid/High/Highest for the sensitivity.
Record Timer
When you set activate the record timer feature, the product will record a video in
parking mode for a preset time. Select from Disabled/3hrs/6hrs/12hrs/48hrs/72hrs for
the recording time.
Battery Protection
When the vehicle battery is consumed to a certain level, this feature stops recording
to prevent battery depletion. Switch the button to ON or OFF to activate or deactivate
the feature. If you have switched the button to OFF, the caution message will appear.
Tap Confirmation on the screen to deactivate the feature. The new setting is applied
automatically.
Battery cutoff voltage
You can set the voltage limit to stop recording at when using the Low Voltage Off
feature. Tap + or - to set the voltage in 0.1 V increment. When the battery's voltage
reaches the set value, recording will stop. For vehicles using a 12 V battery (most
passenger vehicles), set the voltage to 11.6 V–12.3 V.
Wintertime Battery
Protection
You can set the month(s) during the cold season (Jan.–Dec.) to apply the low voltage
protection level of the vehicle. Select the month(s) to apply the battery protection
feature.
• To use parking mode, you must install the hardwiring cable. If continuous power is not supplied to the
product, the product will stop recording when the vehicle engine is turned off.
• The vehicle's battery will not be charged while the vehicle is parked. If you record in parking mode for an
extended period, the vehicle’s battery may be depleted and you may not be able to start the vehicle.
• For more information about parking mode, refer to "3.5 Using parking mode".
• The battery cutoff voltage can be set only when the Battery Protection setting is set to Enabled.
• If the off voltage value is too low, the product may consume the battery completely depending on various
conditions, such as vehicle type or temperature.