User Manual

Settings
25
5.3.2 Setting parking mode
You can set the operating mode of the product while the vehicle is parked. Follow the instructions to set
parking mode.
To use parking mode, you must install the hardwiring cable (optional). If continuous power is not supplied to
the product, the product will stop recording when the vehicle engine is turned off.
For more information about parking mode, refer to "3.5 Using parking mode"
1
From the PC Viewer, click Settings
>
Dash Cam Settings
>
Record Settings.
2
From Parking Mode, select the desired parking mode option.
3
Confirm the message on the pop-up window and click Confirm.
4
Click Save.
5.3.3 Setting the impact sensitivity for parking mode
You can set the detection sensitivity for recording when impact is detected while parking. Refer to the
following instructions to set the parking impact sensitivity.
1
From the PC Viewer, click Settings
>
Dash Cam Settings
>
Record Settings.
2
From Impact Sensitivity in Parking Mode, select the desired sensitivity.
3
Click Save.
5.3.4 Setting the motion detection sensitivity
The Motion detection feature records a video when a moving object is detected near your vehicle. Refer to
the following instructions to set the motion detection sensitivity.
1
From the PC Viewer, click Settings
>
Dash Cam Settings
>
Record Settings.
2
From Motion Detection Sensitivity, select the desired sensitivity.
3
Click Save.