Quick Start Guide

8 9
Attaching the main unit
Attach the main unit to the inner part of the
motorcycle, such as the inside of the seat.
Firmly attach the product to the
motorcycle. The product may become
detached while driving if it is not firmly
attached.
Attaching the remote control
Remove the protective film from the remote
control, and attach it where it can be used
easily without obstructing vehicle operation.
For safe driving, arrange the cables to
prevent the driver's vision from being
obstructed or from interfering with
driving.
Before attaching the product, wipe the
installation surface of the windshield
with a dry cloth. If foreign objects
remain on the surface and the product
cannot be attached firmly, it may
become detached from the installation
location while driving.
Installing the front/rear camera
1
Remove the protective film from the mount
and attach it to a place where the cameras
can record both front and rearview.
Before attaching the product,
wipe the installation surface of the
windshield with a dry cloth. If foreign
objects remain on the surface and
the product cannot be attached
firmly, it may become detached
from the installation location while
driving.