User's Manual

3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129
[phone]
[e-mail]
© 3millID
100-02640-A
www.3millid.com
MANUAL
3M
S-Gang
Keypad
8
*05n#
example
*050#
*051#
*052#
*053#
*054#
.....
.....
.....
.....
.....
*06nnnnn#
example
*07n#
example
*070#
*071#
*072#
*073#
*074#
*075#
*076#
*077#
.....
.....
.....
.....
.....
.....
.....
.....
RX00 LED
PIN CODES
*05
set LED COLOUR CONFIGURATION
SITE CODE
PIN CODES
*06
set SITE CODE EMBEDDING
RX00 COLOUR
PIN CODES
*07
set LED QUIESCENT COLOUR
To set RX Demo enter: *051# once the reader has been
placed into programming mode.
The LED may be configured to the following modes:
6
8
0
9
#
4
7
*
5
1 2 3
The following instructions give a step-by-step procedure for accessing the many features
supported by this reader.
4. keypad programming guide
RX standard LED configuration
RX Demo
RX buzzer
RX AWE (excluded from documentation)
RX MPS (excluded from documentation)
This option allows the SITE CODE number to be combined
with the card number read from the card and sent as the
complete card info’ message. The unit accepts site codes
from 0 to 65535 - however the maximum valid value
depends on the output format.
To embed SITE CODE ‘123’ enter: *0600123# once the
reader has been placed into programming mode.
6
8
0
9
#
4
7
*
5
1 2 3
The LED may be configured to the following standard
colours.
To set the LED to TURQUOISE enter: *076# once the
reader has been placed into programming mode.
6
8
0
9
#
4
7
*
5
1 2 3
Blue
Magenta
Yellow
Orange
Red
White
Turquoise
OFF (LED disabled when in idle mode)