Quick Start Guide

Set up Third Reality Hub
1. Remove the cover and try to plug in a fixed USB-A port or an power
adapter.
2. When power on, the LED light on the hub is slow blinking in blue for
seconds and then change to yellow, indicating that the hub is in pair-
ing mode.
Note: If the hub is not in pairing mode, long press the reset button for
about 15 seconds until the LED light turns on red and then release, it
will slow blinking in yellow indicating that the hub is in pairing mode.
3. Log in the Third Reality APP, click
“
+
”
on top right to add RealityHub.
4. Select WIFI and Initialize RealityHub, after
“
Searching for Realityhub
”
you will see the corresponding Mac No. of the hub.
Note: Third Reality Hub can only support 2.4G WiFi.
02