Smart Plug ZigBee / BLE
What’s in the box? User Guide X 1 Smart Plug X 1 Features 1. 2. 3. 4. Directly work with most of echo devices by using BLE connectivity. Work with compatible ZigBee hubs like SmartThings 2015/2018 or Eero 6/Eero 6 Pro, Switch between BLE and Zigbee. Mesh enabled, increase the range of other mesh devices that are further away from your Echo. Product configuration LED Light Status BLE ZigBee Pairing LED light alternately flashes in green and red. LED light flashes in red.
BLE → ZigBee 1. Press the button and hold, then insert the Smart Plug into an outlet until the green light is ON. 2. Release the button, then press the button immediately. LED light will flash in red, indicating that your Smart Plug is in ZigBee mode now. ZigBee → BLE 1. Press the button and hold, then insert the Smart Plug into an outlet until the red light is ON. 2. Release the button, then press the button immediately.
Using your Smart Plug To control device using voice commands, says “Alexa, turn on/off First Plug”. FCC regulatory conformance： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
