User's Guide

BLE → ZigBee
1. Press the button and hold, then insert the Smart Plug into an outlet until the green light
is ON.
2. Release the button, then press the button immediately. LED light will flash in red,
indicating that your Smart Plug is in ZigBee mode now.
ZigBee → BLE
1. Press the button and hold, then insert the Smart Plug into an outlet until the red light is
ON.
2. Release the button, then press the button immediately. LED light will alternately flash in
green and red, indicating that your Smart Plug is in BLE mode now.
Factory Reset
After your Smart Plug is powered on, press and hold the button for more than 10 seconds
until the LED light flashes indicating that your Smart Plug is in pairing mode. (The mode won’t
be change while factory reset your Smart Plug.)
Setting up your Smart Plug
Pair with compatible Echo Devices
1. Select an outlet near your Echo Device.
2. Power on your Smart Plug.
3. Put your Smart Plug into pairing mode by pressing and holding the button for more than
10 seconds, until the light flashes.
4. Say “Alexa, discover my devices”.
ZigBee Mode, work with Eero 6, Eero 6 Pro, Smart things 2015/2018 and Third Reality
Hub/Smart Speaker
1. Setup your ZigBee hub by following its user guide.
2. Put your Smart Plug into pairing mode by pressing and holding the button for more than
10 seconds, until the light flashes.
3. Follow the instructions in the corresponding App to complete the setup.