User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Split point setting
- 7.5 Metronome
- 7.6 Voices
- 7.7 Songs
- 7.8 Function menu
- 8 Technical specifications
- 9 Troubleshooting
- 10 Voice list
- 11 Song list
- 12 MIDI implementation chart
- 13 Protecting the environment
20 [FUNCTION] | button to call up the Function menu
Hold down the button to enter the system settings.
21 Button to activate / deactivate the Piano mode
7 8 9 ; <:
22 [TO HOST] | USB-to-host interface for connecting the keyboard to a computer (MIDI data)
23 [TO DEVICE] | USB interface for connecting a USB ash drive (USB stick)
24 [PHONES 1 / 2] | signal output sockets for connecting a headset, designed as ¼" jack socket
25 [MIC / AUX IN] | slide switch for selecting the sensitivity of the input socket [AUX IN / MIC]
Move the switch to [MIC] to connect a microphone. Move the switch to [AUX IN] to connect an external audio device,
such as a MP3 player.
26 [AUX IN / MIC IN] | input socket for connecting external audio devices such as MP3 players or a microphone, designed as
a ¼" jack socket
The signal of the connected external audio device is reproduced via the built-in loudspeakers of the digital piano.
27 [AUX OUT] | output sockets for connecting to an amplier, stereo system, mixer or recording device, designed as ¼"
phone jacks
Connect both channels (R and L / Mono) for stereo transmission. Only connect channel (L) for mono transmission.
The keyboard keys are referred to in this manual as shown below.
Connections
Piano keys
Connections and controls
14
DP-140B U BK, DP-140WH U
Digital Piano