User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Connections and operating elements
- 6 Connection options
- 7 Turning the digital piano on / off, setup
- 8 Operating
- 9 Practise and demo songs
- 10 Voice list
- 11 MIDI implementation chart
- 12 Troubleshooting
- 13 Technical specifications
- 14 Plug and connection assignment
- 15 Protecting the environment
Hold down the [FUNCTION] button and press piano keys [C7] and [C#7]
simultaneously to restore the preset value ‘3’ .
8.4.3 Dynamic Acoustic System (DAS)
With this function you can adjust the tone at low volumes to the characteristic of
human hearing. The level of extremely high and low frequencies is dynamically
increased when reducing the volume.
The Dynamic Acoustic System (DAS) is activated automatically when powering up
the digital piano.
Hold down the [FUNCTION] button and press the piano key [A7] to activate or
deactivate the DAS function.
8.5 Recording function
You can record your own songs with the digital piano and save up to ve recordings
as user songs in the internal memory. Unsaved recordings are lost after switching the
digital piano o.
8.5.1 Preparing and starting recording
1. Press the [METRO] and [PLAY] buttons simultaneously to enable the recording
mode.
2. Press one of the piano keys [D#7] … [G7] to select a memory location for
recording.
ð
The digital piano is now record enabled. The /[CHO] button LED
ashes.
3. Set the recording tempo.
4.
Recording starts as soon as you press the /[CHO] button or play the rst
note or chord.
ð
The [METRO] and [PLAY] button LEDs light up.
A7 C8C7
D#7
G7
C7 C8
Operating
30
DP-32 B, DP-32 WH
Digital Piano