User manual

Deleting all recordings
1. Turn o the digital piano.
2. Simultaneously press the [METRO] and [PLAY] buttons and turn the digital
piano back on.
ð
All user recordings are deleted.
8.6 MIDI functions
8.6.1 USB connection to a computer
1. Turn on the computer.
2. Connect the USB port on the rear panel of the digital piano using a standard
USB cable (not included) to the USB port on your computer.
Use a current operating system still supported by the provider to
avoid technical diculties.
3. Then turn the digital piano on.
Please heed the following instructions when connecting USB instruments to
computers. Otherwise, the instrument or the computer may ‘crash’, which can
result in data loss. If a ‘crash’ should occur, turn o computer and instrument
and restart both after a few seconds.
– If the computer is in standby or hibernation, wake the computer
before connecting the USB cable.
– Establish the USB connection between computer and instrument
before turning on the instrument.
– For additional applications you may need a suitable software for
recording and editing music (not included).
8.6.2 Setting the MIDI channel
1. Hold down the [FUNCTION] button and press piano key [B6].
2. Hold down the [FUNCTION] button and press piano key [C7] or [C#7] to set the
desired MIDI OUT channel between ‘1’ … ‘16’ .
Hold down the [FUNCTION] button and press piano keys [C7] and [C#7]
simultaneously to restore the preset value ‘1’ .
AUX OUT AUX IN
C#7
C7B6 C8
Operating
32
DP-32 B, DP-32 WH
Digital Piano