User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Connections and operating elements
- 6 Connection options
- 7 Turning the digital piano on / off, setup
- 8 Operating
- 9 Practise and demo songs
- 10 Voice list
- 11 MIDI implementation chart
- 12 Troubleshooting
- 13 Technical specifications
- 14 Plug and connection assignment
- 15 Protecting the environment
8.3 Voices
8.3.1 Selecting voices
Overall, the digital piano has 16 voices, which can be accessed via piano keys
[A0] … [C2] (see
Ä
Chapter 10 ‘Voice list’ on page 38). A preset voice is assigned to
each piano key.
1. Hold down the [FUNCTION] button and press one of the piano keys [A0] … [C2]
to select the desired voice.
2. To select another voice, hold down the [FUNCTION] button again and press one
of the piano keys [A0] … [C2].
3.
Press the / buttons to select a desired voice.
Alternatively, you can call up the 16 voices of the digital piano via the / buttons
(see
Ä
Chapter 10 ‘Voice list’ on page 38).
8.3.2 Split mode
This feature allows you to select a point that splits the entire keyboard into two sec‐
tions and to assign dierent voices to those sections. The preset split point is on
piano key [F#3].
1. Hold down the [FUNCTION] button and press piano key [A2]. Select the desired
piano key that you want to be the split point. Usually, the split point lies within
the piano keys [C3] … [C6].
2. Release the [FUNCTION] button to apply the setting.
3. To assign voices to the two sections, rst select the rst voice as described in
chapter
Ä
Chapter 8.3.1 ‘Selecting voices’ on page 27.
A0 C1 C2
REC
C2 C3A2
Operating
DP-32 B, DP-32 WH
27