User manual
Table Of Contents
- Table of contents
- 1 General notes
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Control panel and connections
- 6 Connectivity options
- 7 Switching on / off and basic operation
- 8 Functions
- 9 Rehearsal and demo songs
- 10 MIDI implementation chart
- 11 Technical specifications
- 12 Plug and connection assignment
- 13 Protecting the environment
Proceed according to the illustrations and exclusively use the supplied screws. Using
other screws could damage the digital piano housing or the speaker boxes or result
in a reduced stability of the digital piano.
n (7) Hand screws (2 pcs.)
n (9) Phillips-head screws 6 ´ 50 (8 pcs.) and
n (11) Phillips-head screws 4 ´ 15 (2 pcs.)
Insert the four Phillips-head barrel nuts (12) into the rear panel of the pedal box as
shown in the left part of the gure. Use two screws 6 ´ 50 on each side to attach the
two side panels to the pedal box and cover the four screws with screw caps.
Attach the speakers with each two screws 6 ´ 50 to the side panels and cover the
screws with screw caps.
Put the digital piano housing on the stand and ax it using the two hand screws.
Mechanical assembly
Assembly instructions
DP-33
11