Assembly instructions

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 310639_310722_310725_310721_17.05.2022
KB-15
EN
Danger of tipping due to overload
In case of overload, the product may tip over and cause injuries and property damage.
Never exceed the maximum load capacity specied for the product.
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the
coating of your surface and after some time cause permanent dark stains. In case of
doubt, do not put the rubber feet directly on the surface and use a suitable underlay if
necessary, i.e. felt-pad oor protectors or similar.
For the packaging, environmentally friendly materials have been chosen that can be
supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly
disposed of. Do not just dispose of these materials with your normal household waste,
but make sure that they are collected for recycling. Please follow the notes and markings
on the packaging.
Intended use
This product is intended for use as seat. Any other use is considered to be improper
and may result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within
reach of babies and young children. Choking hazard! Ensure that children do not
detach any small parts from the product. They could swallow the pieces and choke!
Never let children unattended use the product.
Danger of tipping on unsuitable ground
If placed on soft or uneven ground, the product may overturn and cause injuries and
property damage. Place the product on at and solid surfaces only.
 Piano bench
 Double-cross precision lifting system
 Upholstered seat: black velvet
 Max. load capacity: 130 kg
1.
Mounting
2. 3.
 Adjustable height: 480 mm - 560 mm
 Seating surface: 520 mm × 290 mm
 Weight: 7.8 kg
Tighten the screws manually. Put the bench in a stable position on the oor. Tighten the screws only then using the included wrench.
This ensures that the bench does not shake.