Specs

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de

DocID: 399665_08.12.16

SP-320 Stand

Assembly instructions

For mounting the SP-320 stand, use the

supplied furniture locks M6 (A), cap screws (B),

plastic caps (C) and hand screws (D).

Use a soft padding to prevent damages to

the surfaces.

1. Place the furniture locks (A) into the provided

blind holes in the cross bar. Make sure that the

furniture locks are positioned so that the

connecting screws can be inserted and fastened.

2. Place the cap screws (B) into the provided blind

holes of the side panels.

Scope of delivery

A: 4 × furniture lock M6

B: 4 × cap screw M6×40

D: 4 × hand screws M5×25

C: 8 × plastic caps

Crossbar

Left and right side panel

PAGE 1
SP-320 Stand Scope of delivery A: 4 × furniture lock M6 Crossbar B: 4 × cap screw M6×40 C: 8 × plastic caps D: 4 × hand screws M5×25 Left and right side panel Assembly instructions For mounting the SP-320 stand, use the supplied furniture locks M6 (A), cap screws (B), plastic caps (C) and hand screws (D). Use a soft padding to prevent damages to the surfaces. 1. Place the furniture locks (A) into the provided blind holes in the cross bar.
PAGE 2
SP-320 Stand x 3. Fix the cross bar with the two side panels using two cap screws respectively. Tipp: Use a second screw driver to avoid that the furniture locks distort. Nut 4. Cover the blind holes in the side panels with the plastic caps provided. 5. Place the digital piano onto the angles of the side panels. Level the windings at the bottom of the piano with the bores in the angles. 6. Fasten the digital pianos with two hand screws (D) to the angles of the side panels from below.