Installation Manual

ManualsBrandsThomas & Betts ManualsFittingsTB 2 45 DEG 316 SS LT FITT

Cat. No. SIZE Description

5331SST6 3/8”

5332SST6 1/2”

3/8”

5337SST6

5341SST6

1/2”5342SST6

3/4”5343SST6

1”5344SST6

1-1/4”5345SST6

1-1/2”5346SST6

2”5347SST6

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

5351SST6

5352SST6

5353SST6

5354SST6

5355SST6

5356SST6

2”5357SST6

1-1/2”

2”

5333SST6

5334SST6

5335SST6

5336SST6

3/4”

1”

1-1/4”

Stainless Steel Fittings

45° Stainless Steel Fittings

90° Stainless Steel Fittings

Stainless Steel Fittings

This guide shows the proper method of installing T&B

liquidtight Fittings. The selection of the

proper raceway, the most appropriate T&B Fitting plus correct installation techniques will provide

both the high performance and reliability demanded by specifying engineers. The following are the

characteristics and specifications for the selection of the appropriate T&B Fittings.

INSTALLATION GUIDE FOR THE CONNECTION OF

STAINLESS STEEL LIQUIDTIGHT FLEXIBLE

METALLIC CONDUIT

SPECIFICATIONS T&B

LIQUIDTIGHT FITTINGS

• UL listed liquidtight.

• CSA certified, dust tight & watertight.

• NPT threads per ANSI/ASME B1.20.1

• Add (HT) to above cat. numbers (Ex. 5331SST6HT) for

high temperature version.

• Add (-6) to above cat. numbers (Ex. 5331SST6-6) for

version with stainless steel ground cone (not listed).

• Add (-6HT) to above cat. numbers (Ex. 5331SST6-6HT) for

high temperature version with stainless steel ground cone

(not listed).

ASSEMBLY

A. Slide on gland nut.

B. Slide on nylon sealing ring.

C. Thread in SAFE-EDGE

Cone.

D. *For knockout applications, use T&B

141SST or 141 series

locknuts and 5262 series sealing O-Rings. (Purchase

separately)

E. Tighten gland nut to UL recommended value.

EXCLUSIVE FEATURES

• Up to 1” size uses SAFE-EDGE

Steel grounding cones

with no sharp edges.

• Blue nylon insulated throats.

INSTALLATION INSTRUCTION

1. Cut the end of the flexible conduit with a clean square cut.

1). Use metal jig. (available from conduit manufacturers)

2). Use 32 Tooth/In. no. set, sharp hacksaw.

3). For high production use

24-32 Tooth/In. set, power

band saw, not more than

400’/minute.

DO NOT USE ABRASIVE WHEEL.

TA05037 A

page 1 of 1

Thomas & Betts Corporation

Memphis, Tennessee

www.tnb.com

WARRANTY: Thomas & Betts sells this product with the understanding that the

user will perform all necessary tests to determine the suitability of this product for the

user's intended application. Thomas & Betts warrants that this product will be free

from defects in materials or workmanship for a period of two (2) years following the

date of purchase. Upon prompt notification of any warranted defect, Thomas & Betts

will, at its option, repair or replace the defective product. Misuse, misapplication or

modification of Thomas & Betts Products immediately voids all warranties.

Limitations and Exclusions:

THE ABOVE WARRANTY IS THE SOLE WARRANTY

CONCERNING THIS PRODUCT, AND IS IN LIEU OF ALL OTHER WARRANTIES

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE

SPECIFICALLY DISCLAIMED. LIABILITY FOR BREACH OF THE ABOVE WARRANTY

IS LIMITED TO COST OF REPAIR OR REPLACEMENT OF THE PRODUCT, AND

UNDER NO CIRCUMSTANCES WILL THOMAS & BETTS BE LIABLE FOR ANY

INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

SS GLAND NUT

LIQUIDTIGHT

FLEXIBLE METAL

CONDUIT

NYLON

SEALING RING

SAFE-EDGE

CONE

SS BODY

BOX WALL

LOCKNUT

(PURCHASE

SEPARATELY)

LOCK TO BODY

128B