Cut Sheet

84
United States
Tel: [phone]
800.326.5282
Fax: [phone]
www.tnb.com
Washdown Industrial/Light Marine — DuraGard
®
DuraGard
®
Engineering Specifications
Performance — Electrical
Dielectric Voltage 3000 volts
Withstand
Max. Working 6000 volts RMS (minimum creepage
Voltage and minimum clearance per UL 840)
Circuit Interrupting/ UL listed and CSA certified for circuit
Load Breaking interrupting at full rated current
Temperature Rise Max. 30° C/86° F temperature rise at full
rated current after 50 cycles of overload at
150% rated current at .75-pf
Performance — Mechanical
Impact Resistance Per UL 1682 Paragraph 34
Cord Round portable service cords.
Accommodation 10 standard diameters from
.405" to 1.00", custom sizes to spec
Terminal In accordance with UL 1682
Identification
Cable Pull Out Force In accordance with UL 1682
Product Identification label and molded
Identification in name
Lockout/Tagout Lockout/tagout hole on plug complies
with OSHA Reg. 29 CFR 1910.147
Performance — Environmental
Moisture Per UL 1682 Paragraph 49
Resistance Watertight/flap screw cover on receptacle,
O-rings on all pins and sleeves, interiors
and plug shell. Watertight even when
not engaged
Flammability V0 or better per UL 94
Operating Maximum continuous: 95° C/203° F
Temperatures Minimum: -40° C/-40° F without impact
Chemicals Resists standard industrial hydrocarbons,
acids, bases and solvents
Material
Contact Carrier Molded arc-resistant UL 94-V0
Interior phenolic thermoset
Housing, Gland Nuts, DuraV
®
UL 94-V0, high-impact
Screw Collar Rings Thermoplastic
O-Rings Buna-N (Nitrile)
Contacts: Pins Brass CDA 360
and Sleeves
Hinge Pins Stainless steel
(Receptacle)
Terminals Brass CDA 360
Terminal Screws, Stainless steel
Flap Springs,
Assembly Screws,
Nuts, Hardware
Gland Friction 20 amp — Nylon
Washer 30, 50 and 60 amp — Aluminum
Cable Clamp Bushing Neoprene
Approvals*
630/E47956
LL14096
* TUV & PSE listed product also available; contact Technical Services
Engineering Specifications — Plugs, Connectors and Receptacles