Cut Sheet

FS/FD Aluminum Device Boxes and Covers
A-55
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com
AFS 2AFSC
CWP-G CDR
Application
• Industrial grade FS/FD device boxes and raintight covers
protect wiring devices, switches, electronic components,
and terminal blocks in dry, damp and wet locations.
• Spacious, accessible wiring chamber provides a convenient
location to maintain or change a system, pull conductors
and make splices
• Junction for branch conduits
• Aluminum boxes can be used with steel rigid conduit
Stainless
steel
springs
Smooth
conduit
stops
High
quality
gaskets
Precision
machined
threads
Copper-free*
aluminum
Clear
marking
Features
• Copper-free* aluminum, stainless steel cover springs
and hinge pins provide increased corrosion resistance
• Die cast construction, boxes with securely fastened
mounting plates and industrial designed covers combine
to produce a rugged protective enclosure for devices
on industrial and OEM applications
• Clean cover edges provide good gasket sealing
• Precision NPT threaded hubs allow trouble-free
field installation for rigid or IMC conduit
• Clear UL, CSA and cubic content markings speed
approval by inspectors
• Boxes — external hub design provides increased
wiring room
• Covers ship complete with gaskets and screws
Standard Materials
• Die-cast aluminum alloy A360 with less than
.004% copper content (copper-free)
• Cover hinge pins and springs: Stainless steel
Standard Finish
• Aluminum lacquer finish
Listings/Compliances
• UL Listed
• Boxes CSA Certified with factory installed ground screw **
• Covers CSA Certified
• Federal Spec. W-C-586
Sample Specifications
• Industrial grade FS/FD device boxes and covers shall be
die-cast copper-free* aluminum alloy A360. All conduit
stops shall be coined and free of rough edges. Raintight
covers shall have stainless steel springs and hinge pins
and are suitable for use in wet locations with cover
closed (CFSB, CFST and CFSTF suitable for wet locations).
Industrial grade FS/FD device boxes and covers shall
be finished with aluminum lacquer. Industrial grade
FS/FD device boxes and covers shall be Thomas & Betts
Catalog No. _______
*Less than .004% copper content
**Consult factory for lead time and minimum quantity