Cut Sheet
Table Of Contents
- T&B Fitting
- Product Overview
- Rigid & Intermediate Metal Conduit Fittings
- Form 7, Form 8, Series 35, Conduit Outlet Bodies & Covers
- Mogul Conduit Outlet Bodies
- FS/FD Cast Device Boxes and Covers
- Conduit Outlet Boxes
- Conduit Outlet Elbows, Reducers, Plugs, and Adapters
- Three-Piece Couplings
- Sealing Fittings
- Kopr-Shield Compound
- Jacketed Metal Clad Cable Termination Fittings
- Tray Cable Fittings
- EMT Fittings
- Liquidtight Flexible Metal Conduit Fittings
- Shureflex™ Nylon Conduit System
- XTRA FLEX System
- Flexible Cord and Cable Fittings
- Flexible Cord and Cable Fittings - Non-Metallic
- Service Entrance Cable Fittings
- Metal Clad Cable, Armored Cable and FlexibleMetal Conduit Fittings
- Non-Metallic Sheathed Cable Fittings
- Conduit Dimensional Data
Rigid and Intermediate Metal Conduit Fittings
Grounding Wedges
CAT. NO.
SIZE
3650
1
⁄2"
3651
3
⁄4"
3652 1"
3653 1
1
⁄4"
3654 1
1
⁄2"
3655 2"
CAT. NO.
SIZE
3656 2
1
⁄2"
3657 3"
3658 3
1
⁄2"
3659 4"
3661 5"
3662 6"
• Provides grounding without a jumper except in concentric knockouts
• When jumper is required, it fits under set screw in grounding wedge
• Update existing installations to meet code requirements for bonding
(NEC Sect. 250-72e) without disconnecting wiring
• For use on new wiring, just loosen bushing, position wedge
and tighten bushing and bonding screw
Application
• To effectively bond terminating fitting or conduit to a box or enclosure
Features
• Sizes
3
⁄4" thru 6" equipped with an additional bonding screw to install
bonding jumper where required
• Can be added to an existing installation without disconnecting conductors
Perfect for grounding old work or new!
Bonding & Grounding Wedges
Standard Material/Finish
1
⁄2" size Steel/Electro Zinc Plated
3
⁄4" thru 6" size Bronze/Tin Plated
Range
1
⁄2" thru 6" conduit
Listings/Compliances
UL File #E3060
CSA File #638
UL 467
CSA C22.2 No. 41
NFPA-70
Federal Specification A-A-50552
A-6
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
Sealing material resists oil, coolants and hydraulic fluids as well as water!
Liquidtight Sealing Gasket
5262 Series Sealing Gasket
CAT. CONDUIT DIMENSIONS (IN.) STD. PKG.
NO. SIZE A B QTY.
5262
1
⁄2" 1.16 .18 50
5263
3
⁄4" 1.49 .19 25
5264 1" 1.75 .19 25
5265 1
1
⁄4" 2.15 .22 5
5266 1
1
⁄2" 2.42 .23 5
5267 2" 2.92 .23 5
5268 2
1
⁄2" 3.44 .23 5
5269 3" 4.08 .23 5
5270 4" 5.29 .31 5
UL File No. E 13938 CSA File No. 2884
Santoprene is a registered trademark of Advanced Elastomer Systems.
The 5262 Series Sealing Gasket includes a stainless steel retaining ring
to prevent elongation of the Santoprene
®
gasket, ensuring a superior seal.
Application
• When used with an externally threaded connector, provides a
tight seal against oil, fumes or moisture at the knockout opening
Features
• Design locks resilient sealing material in steel
• Steel retainer protects seal from extruding out under torque and
limits compression to an optimum predetermined value; provides
high quality seal
• Resilient material flows and seals rough surfaces
• NEMA 3R, 4, 6 and 13
Standard Material
Retainer: 316 Stainless Steel
Sealing Material: Santoprene
®
Thermoplastic Rubber
Range
1
⁄4" thru 4" Hub Size
B
Thickness
A
Stainless
Steel
Retainer
Resilient Seal
Resilient
Sealing
Material
Locked
in Steel
Retainer
UL File No. E-3060
Series 3651
Series 3650