Cut Sheet

Application Tools
Terminal Products and Tools
WT112M
WT111M
WT110M
WT161M
WT2000
CAT. NO. DESCRIPTION PKG. QTY.
WT110M A, B, C non-insulated terminal and splices and A, B 1
non-insulated terminals with insulation grip
WT111M A, B, C, PT non-insulated terminal and splices; includes cutters 1
WT112M A, B, C non-insulated and RA, RB, RC insulated nylon 1
and vinyl terminal and splices; includes cutters
WT161M A, B, C, PT non-insulated terminal and splices;
includes plier grip and cutters 1
WT2000 A, B, C, AB, PT, RA, RB, RC insulated and non-insulated
terminal and splices; includes wire cutters, bolt cutters
and wire stripper 1
Used for installation of various
Sta-Kon
®
terminal series.
Plier Type Tools
Recommended Tools
Plier type if installations are fewer than 20 per day
The Shure-Stake
®
mechanism on mechanical ratchet tools and power tools prevents the dies
from releasing the terminal until the proper compression has been completed. With this method,
an operator achieves a reliable crimp every time. Thomas & Betts tooling techniques correctly
match tools, wire size, and terminal to produce optimum mechanical and electrical performance.
Power type if installations are more than 200 per day
12050
ERG2001
Ratchet type if installations are more than 20 per day
WT112M
F-34
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com