Cut Sheet

Insulated Ferrules
Terminal Products and Tools
CONDUCTOR SECTION DIMENSIONS INCHES/MM INSTALLATION PKG.
CAT. NO. AWG MM2 COLOR A B ØC ØD E TOOLING QTY.
F4004 26 0.14 Gray .413/10.5 .236/6.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F4005 26 0.14 Gray .492/12.5 .315/8.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F4006 24 0.25 Yellow .413/10.5 .236/6.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F4007 24 0.25 Yellow .492/12.5 .315/8.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F4008 22 0.34 Purple .413/10.5 .236/6.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F4009 22 0.34 Purple .492/12.5 .315/8.0 .031/.80 .079/2.0 .010/.25 T3, ERG2 500
F2020 20 0.50 White .453/11.5 .236/6.0 .043/1.1 .098/2.5 .006/0.15 T1, T3 & ERG2 500
F2021 20 0.50 White .531/13.5 .315/8.0 .043/1.1 .098/2.5 .006/0.15 T1, T3 & ERG2 500
F2022 20 0.50 White .610/15.5 .394/10.0 .043/1.1 .098/2.5 .006/0.15 T1, T3 & ERG2 500
F2023 18 0.75 Gray .472/12.0 .236/6.0 .051/1.3 .110/2.8 .006/0.15 T1, T3 & ERG2 500
F2024 18 0.75 Gray .551/14.0 .315/8.0 .051/1.3 .110/2.8 .006/0.15 T1, T3 & ERG2 500
F2025 18 0.75 Gray .630/16.0 .394/10.0 .051/1.3 .110/2.8 .006/0.15 T1, T3 & ERG2 500
F2026 18 0.75 Gray .709/18.0 .472/12.0 .051/1.3 .110/2.8 .006/0.15 T1, T3 & ERG2 500
F2027 18 1.00 Red .492/12.5 .236/6.0 .059/1.5 .118/3.0 .006/0.15 T1, T3 & ERG2 500
F2028 18 1.00 Red .571/14.5 .315/8.0 .059/1.5 .118/3.0 .006/0.15 T1, T3 & ERG2 500
F2029 18 1.00 Red .650/16.5 .394/10.0 .059/1.5 .118/3.0 .006/0.15 T1, T3 & ERG2 500
F2030 18 1.00 Red .728/18.5 .472/12.0 .059/1.5 .118/3.0 .006/0.15 T1, T3 & ERG2 500
F2031 16 1.50 Black .571/14.5 .315/8.0 .071/1.8 .134/3.4 .006/0.15 T1, T3 & ERG2 500
F2032 16 1.50 Black .650/16.5 .394/10.0 .071/1.8 .134/3.4 .006/0.15 T1, T3 & ERG2 500
F2033 16 1.50 Black .728/18.5 .472/12.0 .071/1.8 .134/3.4 .006/0.15 T1, T3 & ERG2 500
F2034 16 1.50 Black .965/24.5 .708/18.0 .071/1.8 .134/3.4 .006/0.15 T1, T3 & ERG2 500
F2035 14 2.50 Blue .591/15.0 .315/8.0 .091/2.3 .165/4.2 .006/0.15 T1, T3 & ERG2 500
F2036 14 2.50 Blue .748/19.0 .472/12.0 .091/2.3 .165/4.2 .006/0.15 T1, T3 & ERG2 500
F2037 14 2.50 Blue .984/25.0 .708/18.0 .091/2.3 .165/4.2 .006/0.15 T1, T3 & ERG2 500
F2038 12 4.00 Gray .889/17.5 .394/10.0 .114/2.9 .189/4.8 .008/0.20 T3 & ERG2 500
F2039 12 4.00 Gray .787/20.0 .472/12.0 .114/2.9 .189/4.8 .008/0.20 T3 & ERG2 500
F2040 12 4.00 Gray 1.024/26.0 .708/18.0 .114/2.9 .189/4.8 .008/0.20 T3 & ERG2 100
F2041 10 6.00 Yellow .787/20.0 .472/12.0 .142/3.6 .244/6.2 .008/0.20 T3 & ERG2 100
F2042 10 6.00 Yellow .984/25.0 .708/18.0 .142/3.6 .244/6.2 .008/0.20 T3 & ERG2 100
F2043 8 10.00 Red .827/21.0 .472/12.0 .181/4.6 .295/7.5 .008/0.20 T3 & ERG2 100
F2044 8 10.00 Red 1.063/27.0 .708/18.0 .181/4.6 .295/7.5 .008/0.20 T3 & ERG2 100
F2045 6 16.00 Blue .906/23.0 .472/12.0 .236/6.0 .346/8.8 .008/0.20 ERG2 100
F2046 6 16.00 Blue 1.142/29.0 .708/18.0 .236/6.0 .346/8.8 .008/0.20 ERG2 50
F2047 4 25.00 Yellow 1.142/29.0 .630/18.0 .295/7.5 .433/11.0 .008/0.20 ERG2 50
F2048 4 25.00 Yellow 1.220/31.0 .708/18.0 .295/7.5 .433/11.0 .008/0.20 ERG2 50
F2049 4 25.00 Yellow 1.378/35.0 .866/22.0 .295/7.5 .433/11.0 .008/0.20 ERG2 50
F2050 2 35.00 Red 1.181/30.0 .630/16.0 .335/8.5 .492/12.5 .008/0.20 ERG2 50
F2051 2 35.00 Red 1.260/32.0 .708/18.0 .335/8.5 .492/12.5 .008/0.20 ERG2 50
F2052 2 35.00 Red 1.535/39.0 .984/25.0 .335/8.5 .492/12.5 .008/0.20 ERG2 50
F2053 1/0 50.00 Blue 1.417/36.0 .787/20.0 .413/10.5 .591/15.0 .014/0.35 ERG2 50
F2054 1/0 50.00 Blue 1.614/41.0 .984/25.0 .413/10.5 .591/15.0 .014/0.35 ERG2 50
Ferrule Dimensions conform to DIN 46228. Part 4.
Gray
Yellow
Purple
White
Gray
Red
Black
Blue
Gray
Yellow
Red
Blue
Yellow
Red
Blue
Insulated Ferrules
• Ferrules are the preferred alternative
to twisting wire stands or tinning the
wire end before terminating into a
terminal block
• Ferrules are thin-walled copper
tubes, which are mechanically
crimped onto the ends of
stranded wires
• They are easy to use — simply strip
the wire, slide the ferrule onto the
end of the wire and crimp
Features
• Ferrules ensure reliable electrical
connections when terminating
conductors in screw clamp
terminal blocks
• Fraying and breaking of wire
strands is prevented and the
possibility of an unreliable
connection is minimized
• Insulated ferrules prevent conductor
breakage due to bending, wire
stress, or vibration, while facilitating
wire insertions into the terminal
block clamp
How to Apply a Ferrule
• Strip the insulation from the end of the wire and insert
into the insulated end of the ferrule
• Using the designated crimping tool, place the metal shaft
into the tool’s appropriate slot. Compress the tool to make
a crescent-shape depression along the length of the ferrule
• Insert the crimped ferrule into the terminal block
• Tighten the ferrule and wire into the terminal block
Materials
• High conductivity copper
• Tin plating
• Meets emerging global standards, requiring wire-to-metric style
terminal block installations be terminated with a “pin” style terminal
• Available in vinyl insulated, nylon insulated, and non-insulated styles
• All styles offered in 22 AWG to 10 AWG and compatible
with existing Sta-Kon
®
tooling
F-30
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com