Datasheet

J24 © 2002 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com
Cable Ties–DELTEC
®
Cable Tie with Double-Locking Head
Max. Wire Tensile
Body Length Bundle Dia. Strength Std.
Cat. No. Width (in.) (in.) (lbs.) Pkg.
TYD510M .394 51.2 – 250
TYD5135M .500 13.5 3.5 250 25
TYD5270M .500 27.0 8.0 250 10
The recommended maximum continuous static loading for the DELTEC
®
straps is 20 lbs. per strap. For best results suggested spacing is
15 inches. It is the responsibility of the user to determine whether or not their application meets our recommendation.
Note: Use WT3D Tool for tensioning and cutoff.
The Deltec
®
Cable
Support System
Provides a strong, long-life and cost
saving method of securing
communication cables
The Deltec
®
Cable Support System is a
user-friendly product designed to
provide ease and flexibility in fastening
communications cables to messenger
strand. It is equally well suited for
copper conductor cable, coaxial cable,
fiber optic cable and inner duct in aerial
applications.
The Deltec
®
system answers your aerial
cable needs with innovative design and
state of the art materials. This system
includes weather-resistant Delrin
®
cable
straps, marine grade locking devices,
and base hanger accessories for
specific applications where mounting is
required.
Deltec
®
cable straps are available in
standard lengths of 10, 13.5, 16 and 27
inches, and in convenient 50 foot reels
where specific lengths need to be
established by the installer in the field.
Additional “standard” lengths can be
established for applications where
higher volumes prevail.
Advantages of the Deltec
®
System
Include:
• Proven years of service.
• No sharp edges - craft friendly! Cable
friendly!
• Ease of installation - one wrap, no re-
treading of re-strap.
• Lowers installation costs.
• High tensile strength after fastening.
• Total flexibility in lengths when using
reel.
• Stackable spacers accommodate all
cable sizes - no need to stock multiple
sizes of individual height spacers.
• Spacer designed to retain strap on
each side and cradle the cable,
providing restricted movement of
spacer and preventing damage to
cable.
• In situations where multiple cables are
supported, the T&B TCP360
stackable spacer may be rotated 90
degrees and installed similar to a
single cable, yet provide the same
restricting features (unlike those
commonly used today).
• Month and year of manufacture
stamped into strap material.
DELTEC
®
Strap on a Reel
Tensile Strength Std.
Cat. No. Description (lbs.) Body Width Pkg.
TYD-50R 50' reel of strap 250 .500 1
696-41794 1000' reel 250 .500 2
SPECIFICATIONS
Strap and body Dupont DELRIN
®
. Offers superior
resistance to sunlight, moisture, and salt
environments.
Locking Device Marine grade corrosion-resistant silicon
bronze.
Installation Range -30°F to 150°F.
Minimum Tensile 250 lbs. minimum.
Strength
Outdoor Life Designed to last a minimum of 20 years
Continuous Load 20 pounds
J
Ty-Rap
®
/Ty-Fast
®